Initial network settings (continued)
6.Enter the NEW NETWORK PASSWORD and
CONFIRM NETWORK PASSWORD.
•Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.
←key: ............. Shifting the position of enter cursor to the left for each character.
→key: ............. Shifting the position of enter cursor to the right for each character.
key:............... Shifting the position of
enter cursor between NEW NETWORK PASSWORD and CONFIRM NETWORK PASSWORD.
DEL key: .......... Deleting the character in the
position of enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPITAL or small.
CLEAR key: ..... Deleting all the entered
characters.
7.When NEW NETWORK PASSWORD and CONFIRM NETWORK PASSWORD are matched, the setting is completed after changing the NETWORK PASSWORD.
•When you select OK and the passwords you entered are matched, the setting change dialog is displayed. After the dialog disappears, the NETWORK menu is displayed.
•When you select CANCEL, the NETWORK menu is displayed without changing the password.
•If the entered content is not matched, NEW
NETWORK PASSWORD screen appears again after an error dialog is displayed.
•It may take some time to reflect the settings.
IP settings
(See page 29 for menu setting.)
1.Display the NETWORK menu.
2.Press the or button to select IP CONFIG.
|
| IP CONFIG | OK |
|
|
|
|
| |||
|
|
|
|
|
|
3.Press the ENTER button.
• IP CONFIG menu appears.
IP CONFIG
DHCP | ON |
|
|
| |||
| |||
IP ADDRESS | 0. 0. 0. 0 | ||
SUBNET MASK | 0. 0. 0. 0 | ||
DEFAULT | 0. 0. 0. 0 | |
GATEWAY | ||
| ||
MAC ADDRESS |
|
Setting or clearing DHCP
1.Display the IP CONFIG menu.
2.Press the or button to select DHCP.
DHCP | ON |
3.Press the ENTER button.
• Confirmation dialog appears.
DHCP : 
ON 
OK : ENTER CANCEL : MENU
4.Press the or button to select ON 
or OFF 
.
5.Press the ENTER button.
•When you select OK, the setting change dialog is displayed. After the dialog disappears, the NETWORK menu is displayed.
•To cancel the setting, press the MENU button.
•It may take some time to reflect the settings.
•When setting DHCP to ON, IP ADDRESS,
SUBNET MASK, and DEFAULT GATEWAY cannot be set. If you set those settings, set DHCP to OFF and perform the IP settings as the following procedures.
IP address settings
1.Display the IP CONFIG menu.
2.Press the or button to select IP ADDRESS.
IP ADDRESS | 0. 0. 0. 0 |
|
|
3.Press the or button to select SET 
.
4.Press the ENTER button.
• IP ADDRESS screen appears.
IP ADDRESS
192 . 168 . |
| 0 . |
| 10 |
|
| ← → | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DEL |
|
|
|
|
|
|
|
|
|
|
|
|
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| CLEAR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OK |
|
|
|
| CANCEL |
| ||
5.Press the , ,, and buttons to move the key cursor, select the numbers to enter, and press the ENTER button.
• Set the numeric value within the range from 0 to
255. However, set the numeric value for the final octet within the range from 1 to 254.
← key: Shifting the position of enter cursor to the left.
→ key: Shifting the position of enter cursor to the right.
DEL key: Deleting the character in the position of enter cursor for each character.
CLEAR key: | Deleting all the entered |
| characters. |