Preparing your projector (continued)
Remote control
|
| 1 | STANDBY ( ) button | |
1 |
| 2 | ON ( I ) button | |
| 3 | COMPUTER button | ||
2 | 14 | |||
4 | HDMI 1/2 button | |||
3 |
| |||
15 | 5 | PICTURE MODE button | ||
4 | ||||
5 | 16 | 6 | F.R.C. button | |
7 | AV MEMORY buttons | |||
6 |
| 8 | p, q, t, u buttons | |
7 |
| |||
| 9 | MENU button | ||
| 17 | |||
| 10 CONTRAST button | |||
8 |
| 11 | BRIGHTNESS button | |
| 12 GAMMA button | |||
|
| |||
| 18 | 13 | BRILLIANT COLOR button | |
| 14 | 3D MODE button | ||
9 | 19 | 15 COMPONENT button | ||
10 | 20 | 16 COLOR MANAGEMENT button | ||
11 | 21 | 17 | ENTER button | |
12 | 22 | 18 | IRIS button | |
13 | 23 | 19 | ASPECT button | |
| 24 | 20 | COLOR TEMP. button | |
|
| 21 SHARPNESS button | ||
|
| 22 | COLOR button | |
|
| 23 | AUTO POSITION button | |
|
| 24 ANAMO button | ||
Important:
•When you press any button on the remote control, the buttons on the remote control are lit. Wait approx. 6 seconds after releasing the button to turn them off.
Picture quality selection buttons
Using the following picture quality selection buttons, you can easily select the preset quality setting. Every time you press the button, the setting switches. Alternatively, you can select the picture quality setting using the IMAGE menu. (See page 30.) Items in the menus are shown in parentheses below.
PICTURE MODE (PICTURE MODE) ... Switches the picture mode.
The following button switches the setting only when the picture mode is set to AV MEMORY1, AV MEMORY2, or AV MEMORY3.
IRIS (AUTO IRIS) | Switches the auto iris mode. |
Picture quality adjusting buttons
When you press any of the following picture quality adjusting buttons, the screen for adjusting the picture quality appears. Adjust the picture quality by pressing the t and u buttons. The picture quality adjustment can be made alternatively in the IMAGE menu. (See page 30.) Items in the menus are shown in parentheses below. You can adjust the picture quality only when the picture mode is set to AV MEMORY1, AV MEMORY2, or AV MEMORY3.
CONTRAST (CONTRAST) | Adjusts the contrast of the projected image. |
GAMMA (GAMMA MODE) | Selects one of the preset gamma mode. Adjustment of USER mode is also |
| available. (See page 39.) |
BRIGHTNESS (BRIGHTNESS) | Adjusts the brightness of the projected image. |
COLOR TEMP. (COLOR TEMP.) | Selects one of the preset color temperatures. Adjustment of USER mode is also |
| available. (See page 38.) |
COLOR (COLOR) | Adjusts the color thickness of the projected image. |
SHARPNESS (SHARPNESS) | Adjusts the sharpness of the projected image. |
F.R.C. (FRAME RATE CONVERSION) | Every time you press the button, the setting of FRAME RATE CONVERSION |
| switches. By pressing the ENTER button and then t or u button with TRUE |
| VIDEO or TRUE FILM selected, you can adjust the effect level of the motion |
| interpolation for the frame rate conversion. |