Microsoft G7VP2 manual Jumper Settings for Sdram Clock Dimm, Jumper JP4 Sdram Clock

2

Hardware Installation

2.7 Jumper Settings for SDRAM Clock (DIMM)

Jumper JP4

SDRAM Clock

JP4 is used to set the SDRAM’s clock according to the CPU clock or AGP clock. If you are using PC-100 SDRAM DIMMs, it is recommended that you set the SDRAM clock according to the CPU clock (2-3 On). This setting will provide better

system performance specially when used with 75/83/95/

100MHz processors. However, if you encounter compatibility

problems with PC-100 SDRAM DIMMs or you are using EDO / PC-66 SDRAM DIMMs, set the SDRAM clock according to the AGP clock (1-2 On).

3 2 13 2 1

1-2 On:	2-3 On:
SDRAM CLK = AGP CLK	SDRAM CLK = CPU CLK
(default)

CPU CLK	SDRAM CLK	AGP CLK
60MHz	60MHz	60MHz
66MHz	66MHz	66MHz
75MHz	60MHz	60MHz
83MHz	66MHz	66MHz
95MHz	66MHz	66MHz
100MHz	66MHz	66MHz

CPU CLK	SDRAM CLK	AGP CLK
60MHz	60MHz	60MHz
66MHz	66MHz	66MHz
75MHz	75MHz	60MHz
83MHz	83MHz	66MHz
95MHz	95MHz	66MHz
100MHz	100MHz	66MHz

22