Microsoft G7VP2 manual Drive a and Drive B, Video, Halt On

Page 36

3

Award BIOS Setup Utility

Drive A and Drive B

These categories identify the types of floppy disk drives installed.

None		No floppy drive is installed
360K, 5.25 in.		5-1/4 in. standard drive; 360KB capacity
1.2M, 5.25	in.	5-1/4 in. AT-type high-density drive; 1.2MB
		capacity
720K, 3.5 in.		3-1/2 in. double-sided drive; 720KB capacity
1.44M, 3.5	in.	3-1/2 in. double-sided drive; 1.44MB capacity
2.88M, 3.5	in.	3-1/2 in. double-sided drive; 2.88MB capacity

Video

This category selects the type of video adapter used for the primary system monitor. Although secondary monitors are supported, you do not have to select the type in Setup.The default setting is EGA/VGA (BIOS default, Setup default).

EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA,VGA, SVGA and PGA monitor adapters.

CGA 40 Color Graphics Adapter. Power up in 40-column mode. CGA 80 Color Graphics Adapter. Power up in 80-column mode.

Mono Monochrome adapter. Includes high resolution monochrome adapters.

Halt On

This category determines whether the system will stop if an error is detected during power up. The default setting is All Errors (BIOS default, Setup default).

No Errors The system boot will not stop for any errors detected. All Errors The system boot will stop whenever the BIOS detects

a non-fatal error.

All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other errors.

All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors.

All, But Disk/Key The system boot will not stop for a disk or keyboard error; it will stop for all other errors.

36

Image 36

Contents G7VP2 37310911Copyright TrademarksFCC and DOC Statement on Class B Table of Contents Appendix B System Error Message Appendix C TroubleshootingSupported Softwares Appendix a Identifying ProcessorsFeatures and Specifications FeaturesIntroduction IntroductionConnectors Level 2 Cache MemoryExpansion Slots Desktop Management Interface DMIIntelligence Dual Function Power Button ATX power supply only RTC Timer to Power-on the System ATX power supply onlyWatchdog Timer Virus ProtectionPackage Checklist Hardware Installation Hardware InstallationSystem Board Layout Example on the right Switch Off DIP Switch Settings for Intel Processors DIP Switch Settings for Cyrix ProcessorsDIP Switch Settings for IBM Processors DIP Switch Settings for IDT ProcessorsDIP Switch Settings for AMD Processors External System Bus Clock Settings Frequency Ratio Settings for IDT Processors DIP Switch and Jumper Settings for Core Voltage Jumper Settings for Clearing Cmos Data Jumper JP1 Clear Cmos DataJumper Settings for Power Supply Type Jumper JP2 Power Supply TypeJumper JPP ATX Power-On/Off Select Pins 1 and 2 On ATX PowerJumper Settings for Sdram Clock Dimm Jumper JP4 Sdram ClockJumper Settings for Watchdog Timer Jumper JP10 Watchdog TimerConnecting the Serial Ports Serial PortsHardware Installation Keyboard Port/Connector Hardware Installation 3 PS/2 Mouse Port Connecting the Parallel Printer PortParallel Port Hardware Installation Floppy Disk Drive Controller IDE Hard Disk InterfaceUniversal Serial Bus Ports Adding a Second IDE Hard DriveIrDA Connector Connecting the USB PortsHardware Installation CPU Fan Connector Chassis Fan ConnectorHardware Installation 11 J13 LEDs and Switches Keylock Keylock and Power LED Connector Hardware Installation Power Supply Connectors Award Bios Setup Utility Award Bios Setup UtilityStandard Cmos Setup Basic Input/Output SystemDate TimeDrive a and Drive B VideoHalt On Memory Award Bios Setup Utility Bios Features Setup Virus WarningQuick Power On Self Test Boot SequenceBoot Up Floppy Seek Boot Up NumLock StatusTypematic Rate Setting Typematic Delay MsecMemory ECC Function Typematic Rate Chars/SecVideo Bios Shadow OS Select for Dram 64MBHDD S.M.A.R.T. Capability C8000-CBFFF Shadow to DC000-DFFFF ShadowAward Bios Setup Utility Chipset Features Setup Software Power-offCPU Temperature Limit System Health MonitorCPU Fan Speed Limit and Chassis Fan Speed Limit Power Management Setup +3.3V, +5V and +12V VoltagesPower Management PM Control by APMVideo Off Method Video Off AfterStandby Mode Suspend ModeHDD Power Down Soft-Off by PwrbtnResume On Alarm Timer hhmmssDate of Month PM EventsAward Bios Setup Utility 5 PNP/PCI Configuration Reset Configuration DataResources Controlled By PCI IRQ Actived By Assign IRQ for VGAPCI Slot 1 Use IRQ and PCI Slot 2 Use IRQ Award Bios Setup Utility Load Fail-Safe Settings Load Optimal SettingsIntegrated Peripherals IDE Prefetch Mode IDE HDD Block ModeOnboard Primary PCI IDE and Onboard Secondary PCI IDE Onboard Uart 2 Mode USB ControllerUSB Keyboard Support Onboard FDC ControllerIR Duplex Mode Use IR PinsOnboard Parallel Port Award Bios Setup Utility Supervisor Password User PasswordAward Bios Setup Utility IDE HDD Auto Detection Award Bios Setup Utility Save & Exit Setup Exit Without SavingSupported Softwares Desktop Management Interface DMISupported Softwares Running the DMI UtilitySupported Softwares Using the DMI Utility Edit DMISupported Softwares Add DMI Load DMI FileSave DMI File System Health Monitor Utility Genesys Logic System Health Monitor for VIAInstalling the Utility DriversAppendix a Identifying Processors Intel ProcessorsCyrix Processors Identifying ProcessorsIBM Processor AMD ProcessorsIDT Processors C6-PSME200GAAppendix B System Error Message Error MessagesPost Beep System Error Message Appendix C -Troubleshooting Troubleshooting ChecklistTroubleshooting C Monitor/DisplayTroubleshooting Power SupplyFloppy Drive Troubleshooting Hard Drive Hard disk failureTroubleshooting Serial Port KeyboardSystem Board