Onkyo HT-S5300 Using the AUX Input jacks on the front panel, Connecting Onkyo uComponents

Page 18

Using the AUX INPUT jacks on the front panel

Analog audio line

Composite

Analog audio L/R

output (➔ 15)

video output

outputs

Portable audio player

Camcorder, etc.

Note

•When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be given a higher priority.

•The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.

Connecting Onkyo uComponents

Step 1:

Make sure that each Onkyo component is connected with an analog audio cable (connection C in the hookup examples) (➔ 17).

Step 2:

Make the uconnection (see illustration below).

Step 3:

If you’re using an RI Dock, or cassette tape deck, change the Input Display (➔ 23).

With u(Remote Interactive), you can use the following special functions:

■System On/Auto Power On

When you start playback on a component connected via u, if the AV receiver is on Standby, it will automati- cally turn on and select that component as the input source.

■Direct Change

When playback is started on a component connected via u, the AV receiver automatically selects that compo- nent as the input source.

■Remote Control

You can use the AV receiver’s remote controller to con- trol your other u-capable Onkyo components, point- ing the remote controller at the AV receiver’s remote control sensor instead of the component. You must enter the appropriate remote control code first (➔ 51).

Note

•Use only ucables for uconnections. ucables are supplied with Onkyo players (DVD, CD, etc.).

•Some components have two ujacks. You can connect either one to the AV receiver. The other jack is for connecting addi- tional u-capable components.

•Connect only Onkyo components to ujacks. Connecting other manufacturer’s components may cause a malfunction.

•Some components may not support all ufunctions. Refer to the manuals supplied with your other Onkyo components.

•While Zone 2 is on, the System On/Auto Power On and Direct Change ufunctions do not work.

IN

L

R

 

 

TV/CD

 

 

IN

 

 

L

REMOTE

 

R

CONTROL

 

 

 

 

 

BD/DVD

 

R

L

e.g., CD player

ANALOG

AUDIO OUT

 

 

 

R

L

e.g., DVD player

ANALOG

AUDIO OUT

En

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents HT-S5300 Board above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents Features AV Receiver HT-R580Speaker Package HTP-580 Front & Rear Panels Front PanelDisplay Power cordUREMOTE Control jack Rear PanelSpeaker Package Subwoofer SKW-580Return button Remote ControllerControlling the AV Receiver Controlling the tunerAbout Home Theater Enjoying Home TheaterSpeaker Configuration Connecting the AV ReceiverConnecting Your Speakers Speaker Connection PrecautionsConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmTo 5/812 to 15 mm Using the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting AV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableConnecting Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function Connecting External Components How to record the videoSystem On/Auto Power On Using the AUX Input jacks on the front panelConnecting Onkyo uComponents Remote ControlConnecting Antenna North American models Asian modelsAssembling the AM loop antenna Video Connection Formats On-screen setup menus are displayed whenWhich Connections Should I Use? Audio Connection FormatsTurning On/Off the AV Receiver Turning OnTurning Off Basic Operations Using the Music OptimizerSetting the Display Brightness Playing the Connected ComponentMuting the AV Receiver Using the Sleep TimerUsing Headphones Changing the Input DisplayListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioSelecting Presets Presetting FM/AM StationsUsing RDS excluding North American models Deleting PresetsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY RDS program types PTYThat you want to record RecordingAV Recording On your recorder, start recordingUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes Dolby TrueHD Resolution AudioDolby Digital Plus *5 DTS-HD HighOnkyo-Original DSP Listening Modes UnpluggedAdvanced Setup On-screen Setup Menus Common Procedures in Setup MenuDigital Audio Digital Audio Input Hdmi InputComponent Component Video Input SubwooferSurrBack Ch Sp Config Speaker ConfigurationFront Crossover Crossover FrequencyDolby Settings Audio AdjustMultiplex/Mono Settings Sp Distance Speaker DistanceDTS Setting Audyssey SettingsReference Level Theater-Dimensional SettingDynamic Volume Listening AngleFM/AM Frequency Setup Settings Speaker SettingsRemote Control Settings Name EditHdmi Setup Using the Audio Settings Tone Control SettingsSpeaker Levels CinemaFILTER Late Night FunctionMusic Optimizer Audio SelectorSync Digital Input Signal FormatsAdjusting the Bass & Treble SyncConnecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverFront High or ZONE2 L/R speaker ter Operating with the remote controller Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Muting ZonesModels sold are different depending on the region Connecting an Onkyo DockControlling iPod Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlAvailable buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsCassettetape deck TV VOL q/wCH + Disc + Can’t turn on the AV receiver TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatVolume cannot be set to Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod On-screen menus don’t appearHow do I change the language of a multiplex source Sound changes when I connect my headphonesCan’t record Ufunctions don’t workSpecifications AV receiverFront Speaker SKF-580 1ch Home Theater Speaker PackageSubwoofer SKW-580 Center Speaker SKC-580About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerMemo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.
Top Page Image Contents