Onkyo HT-S5300 instruction manual Using the Audio Settings, Tone Control Settings, Speaker Levels

Page 41

Note

•The “Power Control” setting can be set only when the above “HDMI Control” setting is set to “On”.

•HDMI power control only works with p-compatible components that support it and may not work properly with some components due to their settings or compatibility.

•When set to “On”, power consumption will increase.

•When set to “On”, regardless of whether the AV receiver is On or in Standby, both audio and video stream from an HDMI input will be output to the TV or other components via HDMI connec- tion (HDMI pass through function). When the HDMI pass through function activates in standby mode, HDMI THRU indi- cator will light.

•The power consumption during standby mode will increase dur- ing the HDMI pass through function; however in the following cases, the power consumption can be saved:

1.The TV is in standby mode.

2.You are watching a TV program.

•Refer to the connected component’s instruction manual for details.

■TV Control

`Off:

TV Control disabled.

`On:

TV Control enabled.

Set to “On” when you want to control the AV receiver from an p-compatible TV that is connected to HDMI.

Note

•Do not assign the component connected with the HDMI input to the TV/CD selector when you set “TV Control” setting to “On”. Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.

•Set to “Off” when the TV is not compatible or when it is unclear whether the TV is compatible or not.

•The “TV Control” setting can be set only when the above

“HDMI Control” and “Power Control” settings are both set to “On”.

•Refer to the connected component’s instruction manual for details.

After changing the settings of the “HDMI Control”, “Audio Return Ch”, “Power Control”, or “TV Con- trol”, turn off the power to all connected pieces of equipment and then turn them on again. Refer to the User’s Manuals for all connected pieces of equipment.

Using the Audio Settings

You can change various audio settings by pressing

AUDIO.

Note

These settings are disabled when:

•a pair of headphones is connected, or

•the “Audio TV OUT” setting is set to “On” (➔ 40) and an input selector other than HDMI is selected.

 

 

1

Press RECEIVER followed by AUDIO.

2

Use q/wto select an item, and e/rto change the

 

setting.

Repeat this step for the other settings.

Tone Control Settings

You can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected.

■Bass

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output by the front speakers.

■Treble

`–10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output by the front speakers.

Note

•To bypass the bass and treble tone circuits, select the Direct lis- tening mode.

•This procedure can also be performed on the AV receiver by using its TONE, –, and + buttons (➔ 43).

Speaker Levels

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to “Level Cal (Level Calibration)” (➔ 36) before setting the AV receiver to Standby.

■Subwoofer

`–15 dB to 0 dB to +12 dB in 1 dB steps

■Center

`–12 dB to 0 dB to +12 dB in 1 dB steps

Note

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to “No” or “None” in the “Sp Config (Speaker Configuration)” (➔ 35) cannot be adjusted.

En

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents HT-S5300 10 cm 4 at the rear. The rear edge of the shelf or Always consider the environmental issues and followBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents Speaker Package HTP-580 FeaturesAV Receiver HT-R580 Front Panel Front & Rear PanelsUREMOTE Control jack Power cordDisplay Rear PanelSubwoofer SKW-580 Speaker PackageControlling the AV Receiver Remote ControllerReturn button Controlling the tunerEnjoying Home Theater About Home TheaterConnecting Your Speakers Connecting the AV ReceiverSpeaker Configuration Speaker Connection PrecautionsTo 5/812 to 15 mm Connecting the Speaker CablesScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Wall Mounting Using the Rubber Stoppers for a More Stable PlatformUsing the Floor Pads for Subwoofer Connected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Signal Components Assignable How to record the video Connecting External ComponentsConnecting Onkyo uComponents Using the AUX Input jacks on the front panelSystem On/Auto Power On Remote ControlAssembling the AM loop antenna Connecting AntennaNorth American models Asian models Which Connections Should I Use? On-screen setup menus are displayed whenVideo Connection Formats Audio Connection FormatsTurning Off Turning On/Off the AV ReceiverTurning On Setting the Display Brightness Using the Music OptimizerBasic Operations Playing the Connected ComponentUsing Headphones Using the Sleep TimerMuting the AV Receiver Changing the Input DisplayTuning into Radio Stations Using the TunerListening to the Radio Listening to the RadioUsing RDS excluding North American models Presetting FM/AM StationsSelecting Presets Deleting PresetsFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP RDS program types PTYAV Recording RecordingThat you want to record On your recorder, start recordingSelecting Listening Modes Using the Listening ModesListening Mode Buttons Explanatory Notes About Listening ModesInput Source Speaker LayoutListening Modes Dolby Digital Plus *5 Resolution AudioDolby TrueHD DTS-HD HighUnplugged Onkyo-Original DSP Listening ModesOn-screen Setup Menus Common Procedures in Setup Menu Advanced SetupComponent Component Video Input Hdmi InputDigital Audio Digital Audio Input SubwooferFront Sp Config Speaker ConfigurationSurrBack Ch Crossover Crossover FrequencyMultiplex/Mono Settings Audio AdjustDolby Settings Sp Distance Speaker DistanceAudyssey Settings DTS SettingDynamic Volume Theater-Dimensional SettingReference Level Listening AngleRemote Control Settings Speaker SettingsFM/AM Frequency Setup Settings Name EditHdmi Setup Speaker Levels Using the Audio SettingsTone Control Settings Music Optimizer Late Night FunctionCinemaFILTER Audio SelectorAdjusting the Bass & Treble Digital Input Signal FormatsSync SyncConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone ZoneFront High or ZONE2 L/R speaker ter Setting the Powered Zone Using ZoneControlling Zone 2 from the AV receiver Adjusting the Volume for Zone Controlling Zone 2 with the Remote ControllerOperating with the remote controller Muting ZonesControlling iPod Connecting an Onkyo DockModels sold are different depending on the region Onkyo Dock CableUP-A1 Dock Using the Onkyo DockRI Dock Controlling Your iPodWithout the RI Control With the RI ControlAvailable buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsYou can reset the remote controller to its default settings Controlling Other ComponentsCH + Disc + Cassettetape deckTV VOL q/w Standby indicator flashes red TroubleshootingCan’t turn on the AV receiver There’s no sound, or it’s very quietVolume cannot be set to There’s no sound with a certain signal formatAbout DTS signals Only the center speaker produces soundAV receiver’s remote controller doesn’t control your iPod Remote controller doesn’t workThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearCan’t record Sound changes when I connect my headphonesHow do I change the language of a multiplex source Ufunctions don’t workAV receiver SpecificationsSubwoofer SKW-580 1ch Home Theater Speaker PackageFront Speaker SKF-580 Center Speaker SKC-580About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerMemo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.
Top Page Image Contents