Onkyo HT-S5300 instruction manual Controlling Other Components, Preprogrammed Remote Control Codes

Page 51

Controlling Other Components

You can use the AV receiver’s remote controller (RC-764M) to control your other AV components. This section explains how to enter the remote control code (with the default underlined) for a component that you want to control: DVD, TV, CD, etc.

Preprogrammed Remote Control Codes

The following REMOTE MODE are preprogrammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.

For details on controlling these components, see the pages indicated.

BD/DVD Onkyo Blu-ray Disc player (➔ 52) TV/CD Onkyo CD player (➔ 52)

PORT Onkyo Universal Port Option (➔ 49)

Entering Remote Control Codes

You’ll need to enter a code for each component that you want to control.

1 Look up the appropriate remote control code in the separate Remote Control Codes list.

The codes are organized by category (e.g., DVD player, TV, etc.).

2 While holding down REMOTE MODE to which you want to enter a code, press and hold down DISPLAY until the remote indicator lights (about 3 seconds).

Note

•Remote control codes cannot be entered for RECEIVER and ZONE 2.

•Only TV remote control codes can be entered for TV.

•Apart from RECEIVER, TV, and ZONE 2, remote con- trol codes from any category can be entered for REMOTE MODE. However, these buttons also work as input selec- tor buttons (➔ 22), so choose a REMOTE MODE that corresponds with the input to which you connect your component. For example, if you connect your CD player to the CD input, choose TV/CD when entering its remote control code.

3 Within 30 seconds, use the number buttons to enter the 5-digit remote control code.

The remote indicator flashes twice.

If the remote control code is not entered success- fully, the remote indicator will flash once slowly.

Remote Control Codes for Onkyo Components Connected via u

Onkyo components that are connected via uare con- trolled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example.

1 Make sure the Onkyo component is connected with an ucable and an analog audio cable (RCA).

See “Connecting Onkyo uComponents” for details (➔ 18).

2 Enter the appropriate remote control code for

REMOTE MODE.

•BD/DVD

`31612:

Onkyo DVD player with u

•TV/CD

`71327:

Onkyo CD player with u

`42157:

Onkyo cassette tape deck with u

•PORT

`81993: Onkyo Dock

See the previous section for how to enter remote control codes.

Note

•When using a cassette tape deck connected via u, press and hold TV/CD to switch to TAPE.

3 Press REMOTE MODE, point the remote control- ler at the AV receiver, and operate the component.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control an Onkyo component that’s not connected via u, use the following remote control codes:

•BD/DVD

`30627:

Onkyo DVD player without u

•TV/CD

`71817:

Onkyo CD player without u

`11807: Onkyo TV

En

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents HT-S5300 Away from the rear panel or wall, creating a flue-like Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Speaker Precautions Package Contents Contents Features AV Receiver HT-R580Speaker Package HTP-580 Front Panel Front & Rear PanelsRear Panel Power cordUREMOTE Control jack DisplaySubwoofer SKW-580 Speaker PackageControlling the tuner Remote ControllerControlling the AV Receiver Return buttonEnjoying Home Theater About Home TheaterSpeaker Connection Precautions Connecting the AV ReceiverConnecting Your Speakers Speaker ConfigurationConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmTo 5/812 to 15 mm Using the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting Hdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksConnecting Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function How to record the video Connecting External ComponentsRemote Control Using the AUX Input jacks on the front panelConnecting Onkyo uComponents System On/Auto Power OnConnecting Antenna North American models Asian modelsAssembling the AM loop antenna Audio Connection Formats On-screen setup menus are displayed whenWhich Connections Should I Use? Video Connection FormatsTurning On/Off the AV Receiver Turning OnTurning Off Playing the Connected Component Using the Music OptimizerSetting the Display Brightness Basic OperationsChanging the Input Display Using the Sleep TimerUsing Headphones Muting the AV ReceiverListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting FM/AM StationsUsing RDS excluding North American models Selecting PresetsRDS program types PTY Displaying Radio Text RTFinding Stations by Type PTY Listening to Traffic News TPOn your recorder, start recording RecordingAV Recording That you want to recordUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes Speaker Layout About Listening ModesExplanatory Notes Input SourceListening Modes DTS-HD High Resolution AudioDolby Digital Plus *5 Dolby TrueHDUnplugged Onkyo-Original DSP Listening ModesOn-screen Setup Menus Common Procedures in Setup Menu Advanced SetupSubwoofer Hdmi InputComponent Component Video Input Digital Audio Digital Audio InputCrossover Crossover Frequency Sp Config Speaker ConfigurationFront SurrBack ChSp Distance Speaker Distance Audio AdjustMultiplex/Mono Settings Dolby SettingsAudyssey Settings DTS SettingListening Angle Theater-Dimensional SettingDynamic Volume Reference LevelName Edit Speaker SettingsRemote Control Settings FM/AM Frequency Setup SettingsHdmi Setup Using the Audio Settings Tone Control SettingsSpeaker Levels Audio Selector Late Night FunctionMusic Optimizer CinemaFILTERSync Digital Input Signal FormatsAdjusting the Bass & Treble SyncZone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting Your Zone 2 Speakers to an Amp in ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverFront High or ZONE2 L/R speaker ter Muting Zones Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Operating with the remote controllerOnkyo Dock Cable Connecting an Onkyo DockControlling iPod Models sold are different depending on the regionUP-A1 Dock Using the Onkyo DockWith the RI Control Controlling Your iPodRI Dock Without the RI ControlAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesEntering Remote Control Codes Remote Control Codes for Onkyo Components Connected via uControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller You can reset the remote controller to its default settingsCassettetape deck TV VOL q/wCH + Disc + There’s no sound, or it’s very quiet TroubleshootingStandby indicator flashes red Can’t turn on the AV receiverOnly the center speaker produces sound There’s no sound with a certain signal formatVolume cannot be set to About DTS signalsOn-screen menus don’t appear Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod There’s no picture from a source connected to an HdmiUfunctions don’t work Sound changes when I connect my headphonesCan’t record How do I change the language of a multiplex sourceAV receiver SpecificationsCenter Speaker SKC-580 1ch Home Theater Speaker PackageSubwoofer SKW-580 Front Speaker SKF-580About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsMemo Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.
Top Page Image Contents