Onkyo HT-S5300 Theater-Dimensional Setting, Reference Level, Dynamic Volume, Listening Angle

■Reference Level

Audyssey Dynamic EQ™ Reference Level Offset

`0 dB:

It should be used when listening to movies.

`5 dB:

Select this setting for content that has a very wide dynamic range, such as classical music.

`10 dB:

Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected for TV content as that is usually mixed at 10 dB below film reference.

`15 dB:

Select this setting for pop/rock music or other pro- gram material that is mixed at very high listening levels and has a compressed dynamic range.

Movies are mixed in rooms calibrated for film refer- ence. To achieve the same reference level in a home the- ater system each speaker level must be adjusted so that –30 dBFS band-limited (500 Hz to 2000 Hz) pink noise produces 75 dB sound pressure level at the listening position. A home theater system automatically cali- brated by Audyssey EQ™ will play at reference level when the master volume control is set to the 0 dB posi- tion. At that level you can hear the mix as the mixers heard it.

Audyssey Dynamic EQ™ is referenced to the standard film mix level. It makes adjustments to maintain the ref- erence response and surround envelopment when the volume is turned down from 0 dB. However, film refer- ence level is not always used in music or other non-film content. Audyssey Dynamic EQ Reference Level Offset provides three offsets from the film level reference

(5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard.

Note

•If “Dynamic EQ” setting is set to “Off”, this setting cannot be selected.

•The setting is stored individually for each input selector.

■Dynamic Volume

`Off:

Audyssey Dynamic Volume™ off.

`Light:

Light Compression Mode becomes active.

`Medium:

Medium Compression Mode becomes active.

`Heavy:

Heavy Compression Mode becomes active. This set- ting affects volume the most, causing all sounds to be of equal loudness.

Note

•If you make Dynamic Volume™ active, “Audyssey” and

“Dynamic EQ” settings are set to “On”. The Dynamic Vol indi- cator will light (➔ 8).

•The setting is stored individually for each input selector.

•If Direct listening mode is selected, this setting cannot be selected.

En

About Audyssey Dynamic EQ

Audyssey Dynamic EQ solves the problem of deterio- rating sound quality as volume is decreased by taking into account human perception and room acoustics.

Dynamic EQ selects the correct frequency response and surround levels moment-by-moment at any user- selected volume setting. The result is bass response, tonal balance, and surround impression that remain con- stant despite changes in volume. Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for deliv- ering a loudness correction solution.

Audyssey Dynamic EQ works in tandem with Audyssey EQ to provide well-balanced sound for every listener at any volume level.

About Audyssey Dynamic Volume

Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Dynamic Volume looks at the preferred volume setting by the user and then monitors how the volume of program material is being perceived by listeners in real time to decide whether an adjustment is needed. When- ever necessary, Dynamic Volume makes the necessary rapid or gradual adjustments to maintain the desired playback volume level while optimizing the dynamic range. Audyssey Dynamic EQ is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same whether watching movies, flipping between television channels, or changing from stereo to surround sound content.

Theater-Dimensional Setting

■Listening Angle

`Wide:

Select if the listening angle is 40 degrees.

`Narrow:

Select if the listening angle is 20 degrees.

With this setting, you can optimize the Theater-Dimen- sional listening mode by specifying the angle of the front left and right speakers relative to the listening position. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings.

Front left speaker	Front right speaker
	20°/40°

38