Onkyo HT-S5300 Connecting Zone, Connecting Your Zone 2 Speakers Directly to the AV receiver

Page 44

Zone 2

In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room.

Connecting Zone 2

There are two ways you can connect Zone 2 speakers:

1.Connect them directly to the AV receiver.

2.Connect them to an amp in Zone 2.

Connecting Your Zone 2 Speakers Directly to the AV receiver

This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. This is called Powered Zone 2, as the Zone 2 speakers are powered by the AV receiver. Note that when Powered Zone 2 is turned off, you can enjoy 7.1- channel playback in your main room.

To use this setup, you must set the “Front High/ Zone2” setting to “Zone2” (➔ 45).

Hookup

•Connect your Zone 2 speakers to the AV receiver’s FRONT HIGH OR ZONE2 L/R speaker terminals.

Main room

 

 

 

TV

 

 

AV receiver

Zone 2

R

L

Connecting Your Zone 2 Speakers to an Amp in Zone 2

This setup allows 7.1-channel playback in your main lis- tening room and 2-channel stereo playback in Zone 2, with a different source in each room.

Hookup

•Use an RCA audio cable to connect the AV receiver’s ZONE 2 LINE OUT L/R jacks to an analog audio input on your Zone 2 amp.

•Connect your Zone 2 speakers to the speaker terminals on your Zone 2 amp.

Main room

TV

AV receiver

Zone 2

 

 

IN

R

L

Receiver/

integrated amp

Note

 

• The Zone 2 volume must be set on the Zone 2 amp.

Note

•With this setup, the Zone 2 volume is controlled by the AV receiver.

En

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents HT-S5300 Always consider the environmental issues and follow 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents Speaker Package HTP-580 FeaturesAV Receiver HT-R580 Front & Rear Panels Front PanelPower cord UREMOTE Control jackDisplay Rear PanelSpeaker Package Subwoofer SKW-580Remote Controller Controlling the AV ReceiverReturn button Controlling the tunerAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsTo 5/812 to 15 mm Connecting the Speaker CablesScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Wall Mounting Using the Rubber Stoppers for a More Stable PlatformUsing the Floor Pads for Subwoofer About AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableAudio return channel ARC function Connecting Components with HdmiJack Signal Components Assignable Connecting External Components How to record the videoUsing the AUX Input jacks on the front panel Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlAssembling the AM loop antenna Connecting AntennaNorth American models Asian models On-screen setup menus are displayed when Which Connections Should I Use?Video Connection Formats Audio Connection FormatsTurning Off Turning On/Off the AV ReceiverTurning On Using the Music Optimizer Setting the Display BrightnessBasic Operations Playing the Connected ComponentUsing the Sleep Timer Using HeadphonesMuting the AV Receiver Changing the Input DisplayUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsSelecting Presets Deleting PresetsDisplaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP RDS program types PTYRecording AV RecordingThat you want to record On your recorder, start recordingSelecting Listening Modes Using the Listening ModesListening Mode Buttons About Listening Modes Explanatory NotesInput Source Speaker LayoutListening Modes Resolution Audio Dolby Digital Plus *5Dolby TrueHD DTS-HD HighOnkyo-Original DSP Listening Modes UnpluggedAdvanced Setup On-screen Setup Menus Common Procedures in Setup MenuHdmi Input Component Component Video InputDigital Audio Digital Audio Input SubwooferSp Config Speaker Configuration FrontSurrBack Ch Crossover Crossover FrequencyAudio Adjust Multiplex/Mono SettingsDolby Settings Sp Distance Speaker DistanceDTS Setting Audyssey SettingsTheater-Dimensional Setting Dynamic VolumeReference Level Listening AngleSpeaker Settings Remote Control SettingsFM/AM Frequency Setup Settings Name EditHdmi Setup Speaker Levels Using the Audio SettingsTone Control Settings Late Night Function Music OptimizerCinemaFILTER Audio SelectorDigital Input Signal Formats Adjusting the Bass & TrebleSync SyncConnecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone ZoneFront High or ZONE2 L/R speaker ter Setting the Powered Zone Using ZoneControlling Zone 2 from the AV receiver Controlling Zone 2 with the Remote Controller Adjusting the Volume for ZoneOperating with the remote controller Muting ZonesConnecting an Onkyo Dock Controlling iPodModels sold are different depending on the region Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockControlling Your iPod RI DockWithout the RI Control With the RI ControlAvailable buttons Preprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerYou can reset the remote controller to its default settings Controlling Other ComponentsCH + Disc + Cassettetape deckTV VOL q/w Troubleshooting Standby indicator flashes redCan’t turn on the AV receiver There’s no sound, or it’s very quietThere’s no sound with a certain signal format Volume cannot be set toAbout DTS signals Only the center speaker produces soundRemote controller doesn’t work AV receiver’s remote controller doesn’t control your iPodThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearSound changes when I connect my headphones Can’t recordHow do I change the language of a multiplex source Ufunctions don’t workSpecifications AV receiver1ch Home Theater Speaker Package Subwoofer SKW-580Front Speaker SKF-580 Center Speaker SKC-580About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerMemo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.
Top Page Image Contents