Onkyo HT-S5300 instruction manual About Hdmi, Supported Audio Formats, About Copyright Protection

Page 60

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc players/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, and multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture.

The AV receiver’s HDMI interface is based on the following:

Audio Return Channel, 3D, x.v.Color, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

2-channel linear PCM (32–192 kHz, 16/20/24 bit)

Multichannel linear PCM (up to 7.1 ch, 32–192 kHz, 16/20/24 bit)

Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your Blu-ray Disc player/DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

Note

The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

En

60

Image 60
Contents HT-S5300 Always consider the environmental issues and follow 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents Features AV Receiver HT-R580Speaker Package HTP-580 Front & Rear Panels Front PanelPower cord UREMOTE Control jackDisplay Rear PanelSpeaker Package Subwoofer SKW-580Remote Controller Controlling the AV ReceiverReturn button Controlling the tunerAbout Home Theater Enjoying Home TheaterConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsConnecting the Speaker Cables Screw-type speaker terminals Strip 1/2 to 5/8 12 to 15 mmTo 5/812 to 15 mm Using the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting About AV Connections Connected image with AV componentsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function Connecting External Components How to record the videoUsing the AUX Input jacks on the front panel Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting Antenna North American models Asian modelsAssembling the AM loop antenna On-screen setup menus are displayed when Which Connections Should I Use?Video Connection Formats Audio Connection FormatsTurning On/Off the AV Receiver Turning OnTurning Off Using the Music Optimizer Setting the Display BrightnessBasic Operations Playing the Connected ComponentUsing the Sleep Timer Using HeadphonesMuting the AV Receiver Changing the Input DisplayUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsSelecting Presets Deleting PresetsDisplaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP RDS program types PTYRecording AV RecordingThat you want to record On your recorder, start recordingUsing the Listening Modes Listening Mode ButtonsSelecting Listening Modes About Listening Modes Explanatory NotesInput Source Speaker LayoutListening Modes Resolution Audio Dolby Digital Plus *5Dolby TrueHD DTS-HD HighOnkyo-Original DSP Listening Modes UnpluggedAdvanced Setup On-screen Setup Menus Common Procedures in Setup MenuHdmi Input Component Component Video InputDigital Audio Digital Audio Input SubwooferSp Config Speaker Configuration FrontSurrBack Ch Crossover Crossover FrequencyAudio Adjust Multiplex/Mono SettingsDolby Settings Sp Distance Speaker DistanceDTS Setting Audyssey SettingsTheater-Dimensional Setting Dynamic VolumeReference Level Listening AngleSpeaker Settings Remote Control SettingsFM/AM Frequency Setup Settings Name EditHdmi Setup Using the Audio Settings Tone Control SettingsSpeaker Levels Late Night Function Music OptimizerCinemaFILTER Audio SelectorDigital Input Signal Formats Adjusting the Bass & TrebleSync SyncConnecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverFront High or ZONE2 L/R speaker ter Controlling Zone 2 with the Remote Controller Adjusting the Volume for ZoneOperating with the remote controller Muting ZonesConnecting an Onkyo Dock Controlling iPodModels sold are different depending on the region Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockControlling Your iPod RI DockWithout the RI Control With the RI ControlAvailable buttons Preprogrammed Remote Control Codes Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerYou can reset the remote controller to its default settings Controlling Other ComponentsCassettetape deck TV VOL q/wCH + Disc + Troubleshooting Standby indicator flashes redCan’t turn on the AV receiver There’s no sound, or it’s very quietThere’s no sound with a certain signal format Volume cannot be set toAbout DTS signals Only the center speaker produces soundRemote controller doesn’t work AV receiver’s remote controller doesn’t control your iPodThere’s no picture from a source connected to an Hdmi On-screen menus don’t appearSound changes when I connect my headphones Can’t recordHow do I change the language of a multiplex source Ufunctions don’t workSpecifications AV receiver1ch Home Theater Speaker Package Subwoofer SKW-580Front Speaker SKF-580 Center Speaker SKC-580About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerMemo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.