Onkyo HT-S5300 Controlling Zone 2 with the Remote Controller, Adjusting the Volume for Zone

Page 46

Controlling Zone 2 with the Remote Controller

ON/STANDBY

ZONE2

INPUT SELECTOR

MUTING

VOLq/w

1 Press ZONE2, and then press ON/STANDBY. Zone 2 turns on, the ZONE 2 indicator lights.

2 To select an input source for Zone 2, press ZONE2, followed by an INPUT SELECTOR.

To select AM or FM press the TUNER input selector repeatedly.

Note

•You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio sta- tion will be heard in each room.

3 To turn off Zone 2, press ZONE2 followed by ON/

STANDBY.

Note

•To control Zone 2, you must press the remote controller’s ZONE2 first.

Adjusting the Volume for Zone 2

■Operating with the remote controller

 

 

1

Press ZONE2.

2

Use VOL q/wto adjust the volume.

■Operating on the AV receiver

1Press ZONE 2 (the ZONE 2 indicator and Zone 2 selector on the display flashes).

2Use –/+within 8 seconds to adjust the volume.

If your Zone 2 speakers are connected to a receiver or inte- grated amp in Zone 2, use its volume control to adjust the volume.

Muting Zones

■Operating with the remote controller

Press ZONE2 followed by MUTING.

Tip

•To unmute,

•Press ZONE2 followed by MUTING again.

Note

•Only analog input sources are output by the ZONE 2 LINE OUT and FRONT HIGH OR ZONE2 L/R speaker terminals. Digital input sources are not output. If no sound is heard when an input source is selected, check if it’s connected to an analog input.

•While Powered Zone 2 is being used, listening modes that require surround back and front high speakers (6.1/7.1), such as Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are unavailable.

•While Zone 2 is on, ufunctions will not work.

•You cannot select different AM or FM radio stations for your main room and Zone 2. The same FM/AM radio station will be heard in each room. For example, if you have an FM station for the main room, that station will also be used in Zone 2.

•Zones can also be unmuted by adjusting the volume.

En

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents HT-S5300 Board above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package Contents Contents AV Receiver HT-R580 FeaturesSpeaker Package HTP-580 Front & Rear Panels Front PanelDisplay Power cordUREMOTE Control jack Rear PanelSpeaker Package Subwoofer SKW-580Return button Remote ControllerControlling the AV Receiver Controlling the tunerAbout Home Theater Enjoying Home TheaterSpeaker Configuration Connecting the AV ReceiverConnecting Your Speakers Speaker Connection PrecautionsScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Connecting the Speaker CablesTo 5/812 to 15 mm Using the Floor Pads for Subwoofer Using the Rubber Stoppers for a More Stable PlatformWall Mounting AV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableJack Signal Components Assignable Connecting Components with HdmiAudio return channel ARC function Connecting External Components How to record the videoSystem On/Auto Power On Using the AUX Input jacks on the front panelConnecting Onkyo uComponents Remote ControlNorth American models Asian models Connecting AntennaAssembling the AM loop antenna Video Connection Formats On-screen setup menus are displayed whenWhich Connections Should I Use? Audio Connection FormatsTurning On Turning On/Off the AV ReceiverTurning Off Basic Operations Using the Music OptimizerSetting the Display Brightness Playing the Connected ComponentMuting the AV Receiver Using the Sleep TimerUsing Headphones Changing the Input DisplayListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioSelecting Presets Presetting FM/AM StationsUsing RDS excluding North American models Deleting PresetsListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY RDS program types PTYThat you want to record RecordingAV Recording On your recorder, start recordingListening Mode Buttons Using the Listening ModesSelecting Listening Modes Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes Dolby TrueHD Resolution AudioDolby Digital Plus *5 DTS-HD HighOnkyo-Original DSP Listening Modes UnpluggedAdvanced Setup On-screen Setup Menus Common Procedures in Setup MenuDigital Audio Digital Audio Input Hdmi InputComponent Component Video Input SubwooferSurrBack Ch Sp Config Speaker ConfigurationFront Crossover Crossover FrequencyDolby Settings Audio AdjustMultiplex/Mono Settings Sp Distance Speaker DistanceDTS Setting Audyssey SettingsReference Level Theater-Dimensional SettingDynamic Volume Listening AngleFM/AM Frequency Setup Settings Speaker SettingsRemote Control Settings Name EditHdmi Setup Tone Control Settings Using the Audio SettingsSpeaker Levels CinemaFILTER Late Night FunctionMusic Optimizer Audio SelectorSync Digital Input Signal FormatsAdjusting the Bass & Treble SyncConnecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneControlling Zone 2 from the AV receiver Setting the Powered Zone Using ZoneFront High or ZONE2 L/R speaker ter Operating with the remote controller Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Muting ZonesModels sold are different depending on the region Connecting an Onkyo DockControlling iPod Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlAvailable buttons Remote Control Codes for Onkyo Components Connected via u Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other ComponentsYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL q/w Cassettetape deckCH + Disc + Can’t turn on the AV receiver TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatVolume cannot be set to Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workAV receiver’s remote controller doesn’t control your iPod On-screen menus don’t appearHow do I change the language of a multiplex source Sound changes when I connect my headphonesCan’t record Ufunctions don’t workSpecifications AV receiverFront Speaker SKF-580 1ch Home Theater Speaker PackageSubwoofer SKW-580 Center Speaker SKC-580Supported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with p connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerMemo Onkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-S5300 specifications

The Onkyo HT-S5300 is a home theater system that aims to enhance the cinematic experience in the comfort of your own home. This system is particularly appealing to movie enthusiasts and gamers alike, providing a rich and immersive sound environment that elevates any viewing experience.

At the heart of the HT-S5300 is its 5.1-channel receiver, which is capable of delivering dynamic sound and powerful audio performance. With a total power output of 650 watts, the system can fill a room with vibrant sounds, making it ideal for both quiet movie nights and intense gaming sessions. The receiver includes several advanced audio decoding formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring high-definition audio that is faithful to the original recordings.

One of the standout features of the HT-S5300 is its integrated Audyssey technology. This feature employs sophisticated algorithms that automatically calibrate the audio output based on the unique acoustics of your room. As a result, it provides optimal sound performance, allowing users to enjoy their content with impressive clarity and depth.

The HT-S5300 also includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices seamlessly. The Audio Return Channel (ARC) ensures that audio from compatible televisions can be sent back to the receiver without needing additional cables, simplifying the setup process.

In addition to digital audio and video capabilities, the HT-S5300 supports wireless streaming through Bluetooth technology. This feature allows users to effortlessly play music from their smartphones, tablets, or other devices directly through the home theater system, broadening the entertainment options available.

The package also includes five compact satellite speakers and a powerful subwoofer, which work together to create a balanced and immersive surround sound environment. The sleek design with a black finish ensures that the speakers can blend seamlessly into any home decor.

Overall, the Onkyo HT-S5300 stands out as a versatile and feature-rich home theater system that combines advanced audio technologies with user-friendly functionality. Whether for movie watching, music listening, or gaming, the HT-S5300 delivers an impressive auditory experience that is sure to satisfy any entertainment enthusiast.
Top Page Image Contents