JVC DLA-X30 Main body Warning display and confirmation/response, Action, Frequency Countermeasures

1 Getting started

Controls and features (continued)

Main body - Warning display and confirmation/response

Warning display

You are informed of the contents of warning notices by the (repeated) displays of the [WARNING] and [LAMP] indicators. Moreover, the [STAND BY / ON] indicator, which shows the operating mode of the unit, is displayed simultaneously as described above.

Upon activation of the warning mode, the projection is interrupted at the same time for about 60 seconds and the cooling fan is turned on. Please disconnect the power plug from the electric socket after the cooling fan has stopped. Subsequently, please perform the following checks and take appropriate countermeasures.

Lighting/flashing lights			Blinking	Content	Confirmation and
status diagram			Frequency		countermeasures
			1 times	Abnormalities in the power
				supply
					● Check that nothing is
STANDBY/ON	LAMP	WARNING	2 times	Cooling fan stops
					blocking the air inlets.
	(*)	(red)			● Check that the external
				Internal temperature is too
			3 times		temperature is normal.
Mode				high
					Action
				External temperature is
display			4 times
				too high	Leave the unit until it cools
					down.
			1 times
					After that, turn on the power
STANDBY/ON	LAMP	WARNING	2 times	Abnormal electrical circuit	again.
	(orange)	(red)	3 times
Mode	Simultaneous			If something is wrong with
display	flashing		4 times		● Check that an impact shock
				the automatic lens cover
					has not occurred during
					operation.
				Lamp does not light up
					● Check that the lamp
STANDBY/ON	LAMP	WARNING	1 times	and unit is unable to	unit and lamp cover are
				project	correctly installed.
					● Check that nothing is
Mode	(orange)	(red)		Lamp is turned off during
			2 times		blocking the auto lens
display				projection	cover.
			3 times	Lamp cover is removed	Action
					Turn on the power again.

If the warning indication is displayed again, please wait for the cooling fan stopped, then pull out the power plug from the power outlet. Then call your authorized dealer for repair.

(*) If the scheduled time for the replacement of the lamp is exceeded, the light might light up.

18