JVC DLA-X90R, DLA-X30, DLA-X70R manual Hdmi, Mask, Progressive, 3D Setting

ENGLISH

Adjustments and settings in the menu (continued)

Mask			It hides the upper, lower, left and right borders of the screen with a black mask. Can be
			individually adjusted vertically and horizontally. Please adjust to your preference.
			(*) When there is a 3D input signal, adjustment is not possible.
			Settings: Off, 2.5%, 5%, Custom	[Off]
	Off		Not masked.
	2.5%		Compared to the original video images, around 2.5% around the video images are
			masked.
	5%		Compared to the original video images, around 5% around the video images are masked.
	Custom
		Left	Compared to the original video images, around 5% of the video images are masked on
			the left side.
			Settings: 0 ~ 5%	[0]
		Right	Compared to the original video images, around 5% of the video images is masked on the
			right side.
			Settings: 0 ~ 5%	[0]
		Top	Compared to the original video images, around 5% of the video images are masked at the
			upper side.
			Settings: 0 ~ 5%	[0]
		Bottom	Compared to the original video images, around 5% of the video images are masked at the
			bottom side.
			Settings: 0 ~ 5%	[0]
Progressive			Interlaced signals (480i/576i/1080i) are converted to progressive signals. Interpolates
			interlaced signal video images with video images from the surrounding. Please set to your
			preference.
			Settings: Auto, Off	[Auto]
	Auto		It is automatically detected if the 24p video images, which can be seen in the film screens,
			interlaced signals from the original video material or if they are the product of signal
			conversion and are interpolated accordingly.
	Off		The interpolation of video images as interlaced video signals, e.g. video material is done.
3D Setting			Go to "[2-3] 3D settings" in the submenu.

[2-1] HDMI

Configure this when using the HDMI terminal.
	HDMI
Use the UP and DOWN keys to select items. Press the [BACK] key to return	Input	Standard
to the previous screen.	Level Check
	Color Space	Auto
(*) This can be set when the HDMI terminal is selected.	Control with HDMI	Off

Operation

Items		Explanation, operation, precautions, settings
Input		Sets the dynamic range of the input video images (scale). Dark and bright areas, which
		are not matched to the range, might get brighter or darker. If you are unsure of the input
		signal dynamic range, please check under "Level Check".
		Settings: Standard, Enhance, Super White	[Standard]
	Standard	It gets set if the dynamic image range of the gradation level of the input image is set to
		16-235. In case of a video signal, please set it up here.
	Enhanced	It is set if the dynamic range of the input video scale level is 0-255.If these are PC signals,
		please set them here.
	Super White	It is set if the dynamic range of the input video scale level is 16-255.Please set the output
		to video equipment compatible with Super White for Super White-enabled DVD / BD etc.

61