JVC DLA-X70R, DLA-X30 manual No device is connected to the input terminal, Input the video signals

Page 86

5Others

In case this message is displayed

	Message	Cause (Details)
		No device is connected to the input terminal.
	COMP	No device is connected to the input terminal.
	COMP	The input terminal is connected but there is no signal.
		The input terminal is connected but there is no signal.

	䇭NO Input	Input the video signals.

A video signal that cannot be used in this unit has been input.

COMP.		Input video signals that can be used.
		*The names of input terminals such as COMP. will be displayed in yellow

		This message is displayed when the accumulated lamp time has
		exceeded 2900 hours.
		exceeded 2900 hours.
Lamp replacement		To clear the message, press the [Back] button.

	Back	Get ready a new lamp unit and replace as soon as possible. Reset
	BACK
		the lamp time after replacing the lamp. (Reference page: 78 to 81)

Image 86

Contents Instrucción para el cliente X70R/DLA-X30JVC Kenwood Corporation PC021082599-1Getting started Safety PrecautionsAbout the installation place Machine Noise Information Germany onlyPower company Power source indicated on the label. If you areNot sure of the type of power supply to your This product is equipped with a three-wire plugDo not allow any unqualified person to install the unit Fragments from a broken light-source lamp may cause injuriesImportant Europe only Power Connection United Kingdom onlyPower cord Do not cut off the main plug from this equipmentProdukte Battery ProductsBatterie PileBatteria Baterías/pilasProductos ProdottiAkku BatteriProdukter TuotteetBaterie БатареяИзделия ProduktyBaterija Produkt Samo u zemljama gde se primenjujeTHX Certification 90 THX CertificationFor detail information about ISF, please refer web site 90 Contents Optional Accessories Accessories/Optional AccessoriesCheck the Accessories Please check with your authorized dealer for detailsMain body Bottom Controls and featuresMain body Front Main body Rear ⑪ Light receiving section Remote control rear⑫ Power input terminal Left button Down buttonStand by BlinkingGreen Main body About the indicator displayStand BYLight onGreen DuringstandbyAction Lighting/flashing lights Blinking Content ConﬁrmationMain body Warning display and conﬁrmation/response Frequency CountermeasuresMain body Input terminal Remote Control To turn off the powerReference How to insert batteries into the remote controlTo switch picture mode Display the information menuHow to adjust the vertical angle About installationImportant points concerning the installation PreparationLeft/Right position Installing the Projector and ScreenLens shift correlation chart Up/Down positionBottom Surface Precautions for MountingFixation of the projector When reflecting off a screen Effective Range of Remote Control UnitWhen directing the remote control toward this unit Screen Size and Projection DistanceTypes of possible input signals About the connectionTypes of possible input signals PC compatible VCR Connection to the unitBD/DVD Recorder BD/DVD Player CamcorderThis unit Connecting via Hdmi CableConnecting via HDMI-DVI Conversion Cable BD/DVD recorderConnecting via Component Video Cable Connecting via RGB Video Cable3D synchro emitter Connecting via PC Cable 90Connected by a 3D Synchro terminal This unitSold separatelyTrigger input terminal Φ Connecting via Trigger CableConnected by RS-232C connection cable TerminalNetwork Connected by LAN terminalConnected by a Remote terminal ServerConnection of the power cord provided Be carful to avoid fire and electric shocksMemo Basic operation procedures Basic OperationAbout Cool Down mode Adjust the shift image positionTurn off power source Adjust accordingly By pressing Up/down/left/right ButtonsAspect the image Frequently used useful functionsProject the image Input Image and Projected Image by Different Screen SizeTo end ExampleMask the image When there is a 3D input signal, adjustment is not possibleExample When the Mask value is changed from Off 5% Image for which quality at the outer area has deterioratedUp and down You can hide the image temporarily① Selec ② Confirm Structure of the menu hierarchy summary Adjustments and settings in the menuPicture Adjust Color TempAdvanced SharpnessCustom Gamma Color ManagementHdmi Input SignalWhen there is a PC signal Input, Aspect PC is Displayed 3D Setting Lens Control InstallationPixel Adjust Network Display SetupFunction When inputting Hdmi signals InformationMenu operation button MenuMenu operation procedure Color Proﬁle Picture AdjustMenu item description This is the default value according to the picture mode To 1-1 Color Temp. of the submenu Gamma To sub-menu1-2 Advanced ResetColor Temp Dark/Bright LevelColor Temp Custom Gamma AdvancedColor Space Color ManagementCMD Demo Lamp PowerClear Motion Drive Lens ApertureDetail Enhance SharpnessCustom Gamma Color Management 90 Picture Position Input SignalItems Explanation, operation, precautions, settings Aspect VideoHdmi 3D SettingItems Explanation, operation, precautions, settings Input MaskLevel Check PhasePC 90 Control with Hdmi3D Setting Keystone InstallationScreen Adjust AnamorphicLens Control Adjust Area Pixel Adjust 90Items Explanation, operation, precautions, settings Adjust Lens CoverAdjust Pattern Color Pixel AdjustAdjust Color AdjustPixelPixel Adjust Whole Adjust Pixel Red Vercital HorizontalSee Pixel Adjust Flow and Operation AdjustFine （-20/-20）（ 5 / 5 ）Vercital V10 H10 Pixel Adjust Zone Adjust RedHorizontal PositionDisplay Setup Function Network Information100% Operation guide glossaryGamma Curve Eye Description of the 3D methodOriginal Left-eye image Right-eye image Stereoscopic video image 3D-glasses CloseEye Left- eye imageLamp replacement procedure Replacing the LampAttach the lamp cover Install the new lamp unitUnit After Replacing the LampRe-confirm Resetting lamp TimeSelectFunction Lamp Reset Arrangement is used for Operations in this explanation Reset the lamp time by remote controlRed Lights Reinstall the inner filter Method for cleaning and replacing filtersClean the filter If the filter is damaged or too dirty to be cleanedMemo Troubleshooting OthersReference page 78 to Off timer?Is the lamp near exhaustion? Input video signals that can be used Input terminal is connected but there is no signalInput the video signals No device is connected to the input terminalTCP/IP-connection RS-232C SpecificationsRS-232C Interface Binary code Command FormatCommand and data Unit IDEnd Command Type Data descriptionRemote control code Binary codeOperating command Type Command DescriptionReference command This section shows the communication examples of RS-232CParts Replacement ILA Device CharacteristicsWhen Unit is Unused for a Long Time Maintenance ProceduresSpeciﬁcations Operation Environment Temperature 5ºC to 35ºCAccessories Reference Others Lens DimensionsUnit mm Index Lamp Remote controlMessage Lens

Related manuals

Manual 289 pages 25.29 Kb

5Others

In case this message is displayed

Message

Cause (Details)

No device is connected to the input terminal.

The input terminal is connected but there is no signal.

Input the video signals.

Input video signals that can be used.

exceeded 2900 hours.

To clear the message, press the [Back] button.

the lamp time after replacing the lamp. (Reference page: 78 to 81)