JVC DLA-X70R, DLA-X30, DLA-X90R manual Vercital Horizontal, Pixel Adjust Whole Adjust Pixel Red

3 Operation

Adjustments and settings in the menu (continued)

See Pixel Adjust Flow and Operation: Adjust(Pixel)

Use this function to make general adjustments in the slight color errors in the horizontal/vertical directions of the video images.

Select [Adjust Area] to [Whole] and select [Adjust Color] and [Adjust Pattern]. Move the cursor to [Adjust(Pixel)], then press the [OK] Button on the remote control to display the adjust pattern and adjust (pixel) window on the screen.

Adjust(pixel) window

You can use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to change position.

Pixel Adjust

Whole Adjust (Pixel) Red

			H	1
			V	1
Color A. ADJUST.		Color P.	A. Area	Select	BACK
GAMMA	COLOR.	COLOR.	PIC.	Operate	BACK
	TEMP	P.FILE.	ADJ.

Adjust Pattern

Vercital

H (Horizontal)

Press the [OK] button on the remote control to enter the adjust operation mode. Use the [UP], [DOWN], [LEFT], and [RIGHT] buttons to move and adjust pixels in the vertical and horizontal directions across the entire screen. The adjustment settings appear in the center of the Adjust (pixel) window. Use the [BACK] but- ton to exit the adjust operation mode.

Pixel adjust setting

Adjust(pixel) window

Pixel Adjust

Whole Adjust (Pixel) Red

			H	1
			V	1
Color A. ADJUST.		Color P.	A. Area	Select	BACK
GAMMA	COLOR.	COLOR.	PIC.	Operate	BACK
	TEMP	P.FILE.	ADJ.

Adjust Color

Remote Control Operation Guide

Use the [GAMMA] button on the remote control to change [Adjust color].

Use the [PIC ADJ] button on the remote control to change [Adjust Area] and switch to the Zone adjust screen. At the same time, the zone cursor will appear on the adjust pattern.

Use the [COLOR P.FILE] button on the remote control to change [Adjust pattern]. Use the [COLOR TEMP] button on the remote control to change [Adjust (Pixel)] and [Fine Tune] and switch to the fine tune window. (*) This becomes [Adjust (Pixel)] when the Adjust Area is set at "Zone".

You can use the [BACK] button on the remote control to stop pixel adjust. When in Adjust Operation Mode, the [BACK] button will exit the mode.

68