JVC DLA-X70R, DLA-X30, DLA-X90R manual Lens Control

ENGLISH

Adjustments and settings in the menu (continued)

[3-1] Lens Control

Use this function to adjust focus, zoom and shift. You can also turn image
		Lens Control
pattern display ON or OFF and save lens position settings during adjustment.		Zoom
Use the UP/DOWN keys to select an adjustment item. Press the		Focus
		Shift
[BACK]	key to return to the previous screen.	Image Pattern	On
		Lock	Off
		Lens Memory Select
		Lens Memory Save
		Lens Memory Name Edit
		Lens Cover	Auto
Items	Explanation, operation, precautions, settings

It controls each motorized functions of the lens during the projector-installation.

Focus		This function is used to adjust the focus.
Zoom		This function is used to adjust the zoom.
Shift		This function is used to adjust the shift.
Image Pattern		It is possible to adjust the projection screen during adjustment of the focus zoom shift.
		Settings: On, Off	[On]
	On	During the adjustment, the image pattern is displayed.
		The image pattern is displayed in conjunction with the above setting items.
	Off	The external input signal is displayed without displaying the image pattern.
Lock		This sets the lens control to on/off.
		Settings: On, Off	[Off]
	On	It is not possible to adjust the above setting items. If the remote control button "LENS"
		button is pressed, a warning message is issued.
	Off	This functions as lens control function.
Lens Memory Select		Use this function to call up saved lens adjustment data. Configure to automatically adjust
		the lens to the saved settings.
		(*) There may sometimes be a slight difference between this and saved conditions.
Lens Memory Save		Select lens focus, zoom and shift settings after adjustments have been made to save
		the adjustment data at the time of selection. Select Memory 1, Memory 2 or Memory 3 in
		accordance with your preference. You can also save as a different name when save data.
Lens Memory		You can edit the lens memory name.
Name Edit		(*) No. of characters is limited to 10.
		(*) You can use capital and small alphabet letters, numbers and symbols.
	Memory1	Select the user name you want to edit.
	Memory2	Press the [OK] key on the main unit or on the remote control to confirm and enter edit
	Memory3	mode.
		(*) A "-" displays if the data is not saved.
		(*) Press the [BACK] key on the main unit or on the remote control to exit edit mode.
		Doing so will delete the content of your modifications.
	Input cursor	This displays the place where you will enter the characters. The cursor will move
		automatically; it cannot be moved to the left or right.
	Select cursor	Move the cursor using the [UP], [DOWN], [LEFT], and [RIGHT] keys on the main unit or
		on the remote control.

Move to the letter you want to enter and press the [OK] key on the main unit or on the remote control to set the letter at the input cursor position in the NAME field.

Operation

65