JVC DLA-X30 To 1-1 Color Temp. of the submenu Gamma, Dark/Bright Level, Picture Tone, Tint

3 Operation

Adjustments and settings in the menu (continued)

Color Temp.		It is possible to set the color temp.
		To "[1-1] Color Temp." of the submenu
Gamma		It is possible to set the gamma curve. Please set to your preference.
		Settings: Normal, A (3D), B (3D), Film 1, Film 2, Film 3 Film 4, A, B, C, D, Custom 1,
		Custom 2, Custom 3		[Normal]
	Normal	Typically we recommend this setting.
		(*) You cannot configure Normal Mode when the "Picture Mode" is set to "Film" or "3D".
		A (3D), B (3D) can only be set, if the "Picture Mode" is "3D".
	A (3D)	This is a standard gamma curve for 3D.
	B (3D)	A (3D) will be brighter.
		Film 1, 2, 3, 4 can only be set if the "Picture Mode" is set to "Film" .
	Film 1	This is a gamma curve that approximates the characteristics of an Eastman Kodak
		Company film for movies. 90	70
	Film 2	This is a gamma curve that approximate the gamma curve characteristics of a
		cinematographic film made by the FUJIFILM Corporation.
	Film 3	This is a gamma curve that is even more focused on tone for the gamma of Film 1.
	Film 4	This is a gamma curve that emphasizes more contrast for the gamma of Film 2.
		(*)You cannot configure A, B, C, and D when the "Picture Mode" is set to "Film" or "3D".
	A	In regard to normal gamma, this is a gamma curve focused on tone.
	B	This is a gamma curve for the film's unique S curve.
	C	This is a gamma curve that – in regard to the gamma of B – emphasized even more the
		feeling of contrast.
	D	For normal, this is a gamma curve where the intermediate gradations look very bright.
	Custom 1	(*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture
	Custom 2	Mode" is set to 3D.
	Custom 3	Under submenu "[1-2-2] Custom Gamma", it is possible to change the gamma curve and
		save it.
		The initial value of Custom 1, 2, and 3 is the same as for "Normal".
Dark/Bright Level		Compensating darkness / brightness of an area.
		(*) It is possible to set it unless the "Picture Mode" is set to "Film".
	Dark Level	Settings: (makes dark areas darker) -7 to 7 (brightens dark areas)		[0]
	Bright Level	Settings: (darkens bright areas) -7 to 7 (makes bright areas brighter)		[0]
Picture Tone		You can reproduce the intensity of the exposure image.
		(*) This function can be configured when the "Picture Mode" is set to "Film" and "Gamma"
		is set to "Film 1-4".
		(*) "Video Tone" is displayed when the "Picture Mode" setting is anything except "Film".
	White	Settings: (The more under-exposure, the darker) -16 to 16 (the more over-exposure, the
	Red	brighter)		[0]
		Settings: (under-exposure to for red), -16 to 16 (over-exposure for red)		[0]
	Green	Settings: (under-exposure for green) -16 to 16 (over-exposure for green)		[0]
	Blue	Settings: (under-exposure for blue) -16 to 16 (over-exposure for blue)		[0]
Contrast		Adjusts the contrast of the video images.
		Settings: (blackish) -50 50 (whitish)
Brightness		You can adjust the brightness of the video image.
		Settings: (dark) -50 to 50 (bright)
Color		Adjust the color intensity of the video images.
		Settings: (dim), -50 to 50 (saturated)
Tint		Adjusts the image tint of the video images.
		Settings: (reddish) -50 to 50 (greenish)
Advanced		Functions such as contour correction, custom gamma and color management can be set
		to sub-menu"[1-2] Advanced".
Reset		Sets settings to default factory settings.

54