JVC DLA-X90R manual Adjust the shift image position, Turn off power source, About Cool Down mode

5 Adjust the shift (image position)

ENGLISH

LENS

Lens Control

Shift

Select Back

Operate BACK

Adjust accordingly

by pressing the

up/down/left/right

buttons

MEMO

About Cool Down mode

● The Cool Down mode is a

function to cool down the lamp

●After adjusting the image position, it may be necessary to select “Pixel Adjust” from the Settings menu “Installation”. (Reference page: 66 to 67)

● Every time the LENS button is pressed, the adjustment item will be switched among “Focus”, “Zoom” and “Shift”.

OK It can also be switched with the button.

for approximately 60 seconds

after projection is complete.

This function prevents the

internal parts of the unit from

deformation or damage due to

overheating of the lamp. It also

prevents lamp blowout and

premature shortening of lamp

LENS

)RFXV =RRP 6KLIW

life.

● During Cool Down mode, the

6 Turn off power source

STAND BY

While a confirmation screen is displayed

STAND BY

STAND BY/ON

Blinking (Red Lamp)

Cool Down mode

STAND BY/ON

Light on (Red Lamp)

● When power off, the lens cover will be closed. 90 70

●Set the lens cover. X307

●You can also press the button on the unit to turn off the power. (Reference page: 16)

●Pull out the power plug when the unit will not be used for a prolonged time.

[STANDBY/ON] indicator blinks

in red.

● After the Cool Down mode is

complete, the unit automatically

returns to standby mode.

● Do not pull out the power plug

during Cool Down mode. This

may shorten the lamp life and

cause a malfunction.

● The slide cover will not close

if the [Slide Cover] is set to

[Open] in the [3. Setup] -

[3-1. Lens Control] menu.

(Reference page: 66)

Operation

37