JVC GV-LS2 U manual Select Stream Settings in Network, MPEG-2 TS 720x576/MotionJPEG, 15 fps, Fps

Page 17

Selecting the Format of Images to be Output/Saved

This unit can output up to two lines of images. Set the output method and image quality appropriate for your needs. For the "NETWORK" settings not mentioned on these pages, refer to page 41 .

1Select "STREAM SETTINGS" in "NETWORK".

If the sub settings are not displayed, click "+" on the left of "NETWORK".

2Select an option from "STREAM 1/STREAM 2".

MotionJPEG(640x360)/NONE:

Select this to save recorded data inside the unit. MotionJPEG (640x360) is used to control remotely from a browser, etc.

MPEG-2 TS (720x576)/MotionJPEG (640x360):

Outputs low resolution data that can be used for streaming, etc.

MPEG-2 TS (1920x1080)/MotionJPEG (640x360):

Outputs high resolution data that can be used for streaming, etc.

3Select an option from "MAX FRAME RATE (MotionJPEG)".

Preparation

15 fps:

Outputs images at a rate of up to 15 frames per second. Suitable for shooting fast-moving subjects.

7.5 fps:

Outputs images at a rate of up to 7.5 frames per second. Suitable if the communication speed or terminal's throughput is low.

Selectable only when "STREAM 1/STREAM2" is set to "MotionJPEG(640x360)/NONE."

4Click the "SAVE" button.

The output image quality has been set.

17

Image 17

Contents GV-LS2 Table of Contents Network CAMERA/PAN Tilter Manage Connecting an External MicConnecting the AV Cord Verifying the Accessories Front Back Component Names and FunctionsCamera Bottom Introduction TopBottom Back PantilterFront Use SettingExample 2 Record birds coming to a feeder on the balcony SetupExample 3 Live-stream a performance in a studio AdditionStarting shooting Flow of Connection/SetupAttach the LAN cable to the unit Connecting the Camera to Your ComputerRequired operating environment Connecting the AC Adapter IP Address Configuring the initial settingsSubnet Mask ListHttp//condigured IP address8000 Select Common Settings in Manage Configuring the Camera SettingsAdjusting the clock Click the Update button on the right Setting the user name and passwordChange Administrator USER/PASSWORD Enter USERNAME, PASSWORD, and Password ConfirmMPEG-2 TS 720x576/MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 1920x1080/MotionJPEG Select an option from MAX Frame Rate MotionJPEGObtaining a Ddns account Setting up the Ddns accountSelect Monitoring Settings in Network Click the ADD button Adding a camera drivers userDefault Gateway Establishing a wired connection to the access pointChanging the Connection Destination Subnet MaskUsing the WPS function Connecting to the access point wirelessly Wi-FiSearching and connecting to the access point Select Wireless Network in NetworkEnter Password Click the Save button Connecting manuallyConnecting to a computer directly Wi-Fi Direct Click the Save button Select Common Settings in Manage Connecting Multiple CamerasAttaching the Pantilter Attaching the PantilterPush the camera straight down Screw and fix the cameraRemoving the pantilter Connecting the AC adapterRemove all tape from the pantilter Loosen the camera fixing screw sufficientlyAttach the conversion cable to the stopper of the LAN cable Establishing a wired connectionAttach the LAN cable to the unit in numerical order Connect the camera to your computer via the LAN cableInserting Inserting/Removing an SD CardRemoving Compatible SD cardsAttaching Attaching/Removing the BatteryCharging Approximate charging timesConnecting to the camera Connecting an External MicConnecting to the pantilter Attaching to the hot shoeConnecting the AV Cord Starting/Stopping recording Using the Unit AloneTurning on/off the power Click the LOG in button Controlling from a Web BrowserLogging Monitor Controlling the camera Monitor tabFile Management StatusSD card Reload button Update images Setting buttonZoom ratio Configuring the camera settings Use Folder/File lists Managing files stored on the SD card File Management tabTransfer DeleteCamera Checking the message history Status tabNetwork LOG in UserStreaming images Installing JVC CAM ControlNames of Apps for mobile terminals Using the Mobile TerminalInstalling the App for mobile terminals Wired Network Setting Item ListWireless Network InformationSSID, Authenticate METHOD, Password Registered Access PointPassword Port Number Monitoring SettingsUPnP DdnsMAX Frame Rate MotionJPEG Stream SettingsStream 1 / Stream PAN Tilter Settings Camera SettingsMedia Management Common SettingsTurn OFF Camera Power cannot be turned on remotelyConnection TroubleshootingProblem Check Refer to Direct SetupURL Information Use Information Message Check Refer to Error messagesNo Updates Available Incorrect PasswordUpdate Corrupted Installed Update on thisLamp Status List PowerWPS Power Deleting Resetting the connection information Resetting to the factory settingsClick the Exec button on the right To execute, click the Exec buttonTo prevent damage and prolong service life Battery Pack optionalUpdating the firmware To avoid hazardsConnectors SpecificationsCamera VideoAC adapter UIA324-12 Stream output formatPantilter GV-LS2WUP MPEG-2 TSJVC Kenwood Corporation 0812HO-MW-VM