JVC GV-LS2 U manual Information

Page 52

Information

	Problem		Check	Refer to

		•	Camera images disappear if no operation is
			performed for 120 hours. Perform one of the following
			so that images reappear:
			––Press the shooting button. (Shooting starts.)
			––Operate the pantilter.
	Camera images do not appear./		––Press the reload button.	–
	Camera images are gone.		––Disconnect and then connect the AV cable.	–
	Camera images are gone.		––Disconnect and then connect the AV cable.
		•	Do not connect the AV cable to the camera and
			pantilter simultaneously.
		•	Camera images disappear automatically as it cannot
			transmit images 12 or more consecutive hours. Press
			the reload button to display images.

		•	Connect the AC adapter to the pantilter. If the adapter	page 26
		•	Connect the AC adapter to the pantilter. If the adapter
			is connected to the camera, the pantilter does not
			work.	page 27
		•	Use the supplied LAN cable. Secure it with a stop.	page 27
		•	Use the supplied LAN cable. Secure it with a stop.	page 27
		•	Be careful not to twist the cable when securing it.	page 27
		•	Be careful not to twist the cable when securing it.	page 27
		•	When the LAN cable is in contact with the floor, etc.,	page 27
		•	When the LAN cable is in contact with the floor, etc.,
			the pantilter may not work properly due to cable
	The pantilter does not work./The		friction.	page 27
	The pantilter does not work./The	•	The pantilter may not work properly when placed on	page 27
	center position of the camera	•	The pantilter may not work properly when placed on
	center position of the camera		a slant.
	differs.		a slant.	page 30
	differs.	•	If a mic or the like is attached to the hot shoe, remove	page 30
		•	If a mic or the like is attached to the hot shoe, remove
			it.	page 29
		•	Before attaching the camera to the pantilter, remove	page 29
		•	Before attaching the camera to the pantilter, remove
			the battery from the camera.	page 27
		•	Do not touch the camera during position adjustment.	page 27
		•	Do not touch the camera during position adjustment.
		•	The center position of the camera may differ slightly	page 27
			under circumstances such as at low temperatures;	page 27
			under circumstances such as at low temperatures;
			however, this is not malfunction.

52

Image 52

Contents GV-LS2 Table of Contents Connecting the AV Cord Connecting an External MicNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Camera Component Names and FunctionsFront Back Introduction Top BottomFront PantilterBottom Back Setting UseSetup Example 2 Record birds coming to a feeder on the balconyExample 3 Live-stream a performance in a studio AdditionFlow of Connection/Setup Starting shootingRequired operating environment Connecting the Camera to Your ComputerAttach the LAN cable to the unit Connecting the AC Adapter Configuring the initial settings IP AddressSubnet Mask ListHttp//condigured IP address8000 Adjusting the clock Configuring the Camera SettingsSelect Common Settings in Manage Setting the user name and password Click the Update button on the rightChange Administrator USER/PASSWORD Enter USERNAME, PASSWORD, and Password ConfirmSelect Stream Settings in Network MPEG-2 TS 720x576/MotionJPEGMPEG-2 TS 1920x1080/MotionJPEG Select an option from MAX Frame Rate MotionJPEGSelect Monitoring Settings in Network Setting up the Ddns accountObtaining a Ddns account Adding a camera drivers user Click the ADD buttonEstablishing a wired connection to the access point Default GatewayChanging the Connection Destination Subnet MaskConnecting to the access point wirelessly Wi-Fi Using the WPS functionSearching and connecting to the access point Select Wireless Network in NetworkConnecting manually Enter Password Click the Save buttonConnecting to a computer directly Wi-Fi Direct Connecting Multiple Cameras Click the Save button Select Common Settings in ManageAttaching the Pantilter Attaching the PantilterPush the camera straight down Screw and fix the cameraConnecting the AC adapter Removing the pantilterRemove all tape from the pantilter Loosen the camera fixing screw sufficientlyEstablishing a wired connection Attach the conversion cable to the stopper of the LAN cableAttach the LAN cable to the unit in numerical order Connect the camera to your computer via the LAN cableInserting/Removing an SD Card InsertingRemoving Compatible SD cardsAttaching/Removing the Battery AttachingCharging Approximate charging timesConnecting an External Mic Connecting to the cameraConnecting to the pantilter Attaching to the hot shoeConnecting the AV Cord Turning on/off the power Using the Unit AloneStarting/Stopping recording Logging Controlling from a Web BrowserClick the LOG in button Controlling the camera Monitor tab MonitorFile Management StatusZoom ratio Reload button Update images Setting buttonSD card Configuring the camera settings Managing files stored on the SD card File Management tab Use Folder/File listsTransfer DeleteChecking the message history Status tab CameraNetwork LOG in UserInstalling JVC CAM Control Streaming imagesInstalling the App for mobile terminals Using the Mobile TerminalNames of Apps for mobile terminals Setting Item List Wired NetworkWireless Network InformationPassword Registered Access PointSSID, Authenticate METHOD, Password Monitoring Settings Port NumberUPnP DdnsStream 1 / Stream Stream SettingsMAX Frame Rate MotionJPEG Camera Settings PAN Tilter SettingsCommon Settings Media ManagementPower cannot be turned on remotely Turn OFF CameraProblem Check Refer to TroubleshootingConnection URL SetupDirect Information Use Information Error messages Message Check Refer toIncorrect Password No Updates AvailableUpdate Corrupted Installed Update on thisWPS Power PowerLamp Status List Resetting to the factory settings Deleting Resetting the connection informationClick the Exec button on the right To execute, click the Exec buttonBattery Pack optional To prevent damage and prolong service lifeUpdating the firmware To avoid hazardsSpecifications ConnectorsCamera VideoStream output format AC adapter UIA324-12Pantilter GV-LS2WUP MPEG-2 TSJVC Kenwood Corporation 0812HO-MW-VM