JVC GV-LS2 U manual Monitoring Settings, Port Number, UPnP, Ddns

Page 43

"MONITORING SETTINGS"

Change the settings for connecting via a network.

1

2 3

4

5

1"USER (JVC CAM driver)" Lists the registered users. For details, refer to page 19 .

"ADD" button

Up to four camera driver's users can be added.

"UPDATE" button

Update the user name and password of the registered user.

"DELETE" button

Delete the registered user.

2"PORT NUMBER"

Change the port number assigned to the unit, e.g. if the unit conflicts with other devices.

3"UPnP"

Select "OFF" or "ON" for the UPnP (Universal Plug and Play) function. Set it to "OFF" when you connect to a UPnP-incompatible access point (wireless LAN router) or multiple UPnP-compatible devices are connected.

CAUTION

If the camera's network setting is set to "MANUAL", the UPnP does not work.

In this case, set your access point so that you can access the camera on the Internet.

"UPnP" may be called as follows depending on the access point:

–"IP Masquerade"

–"Network Address Translation"

–"Virtual Server"

4"DDNS"

Select "OFF" or "ON" for the DDNS (Dynamic Domain Name System) function. To use our DDNS service, set it to "ON", and enter "USERNAME" and "PASSWORD". ( ➭ page 18)

5"SAVE" button

After changing the above settings, click this button to save the changes.

Information

43

Image 43

Contents GV-LS2 Table of Contents Connecting the AV Cord Connecting an External MicNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Camera Component Names and FunctionsFront Back Bottom Introduction TopFront PantilterBottom Back Use SettingAddition SetupExample 2 Record birds coming to a feeder on the balcony Example 3 Live-stream a performance in a studioStarting shooting Flow of Connection/SetupRequired operating environment Connecting the Camera to Your ComputerAttach the LAN cable to the unit Connecting the AC Adapter List Configuring the initial settingsIP Address Subnet MaskHttp//condigured IP address8000 Adjusting the clock Configuring the Camera SettingsSelect Common Settings in Manage Enter USERNAME, PASSWORD, and Password Confirm Setting the user name and passwordClick the Update button on the right Change Administrator USER/PASSWORDSelect an option from MAX Frame Rate MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 720x576/MotionJPEG MPEG-2 TS 1920x1080/MotionJPEGSelect Monitoring Settings in Network Setting up the Ddns accountObtaining a Ddns account Click the ADD button Adding a camera drivers userSubnet Mask Establishing a wired connection to the access pointDefault Gateway Changing the Connection DestinationSelect Wireless Network in Network Connecting to the access point wirelessly Wi-FiUsing the WPS function Searching and connecting to the access pointEnter Password Click the Save button Connecting manuallyConnecting to a computer directly Wi-Fi Direct Click the Save button Select Common Settings in Manage Connecting Multiple CamerasScrew and fix the camera Attaching the PantilterAttaching the Pantilter Push the camera straight downLoosen the camera fixing screw sufficiently Connecting the AC adapterRemoving the pantilter Remove all tape from the pantilterConnect the camera to your computer via the LAN cable Establishing a wired connectionAttach the conversion cable to the stopper of the LAN cable Attach the LAN cable to the unit in numerical orderCompatible SD cards Inserting/Removing an SD CardInserting RemovingApproximate charging times Attaching/Removing the BatteryAttaching ChargingAttaching to the hot shoe Connecting an External MicConnecting to the camera Connecting to the pantilterConnecting the AV Cord Turning on/off the power Using the Unit AloneStarting/Stopping recording Logging Controlling from a Web BrowserClick the LOG in button Status Controlling the camera Monitor tabMonitor File ManagementZoom ratio Reload button Update images Setting buttonSD card Configuring the camera settings Delete Managing files stored on the SD card File Management tabUse Folder/File lists TransferLOG in User Checking the message history Status tabCamera NetworkStreaming images Installing JVC CAM ControlInstalling the App for mobile terminals Using the Mobile TerminalNames of Apps for mobile terminals Information Setting Item ListWired Network Wireless NetworkPassword Registered Access PointSSID, Authenticate METHOD, Password Ddns Monitoring SettingsPort Number UPnPStream 1 / Stream Stream SettingsMAX Frame Rate MotionJPEG PAN Tilter Settings Camera SettingsMedia Management Common SettingsTurn OFF Camera Power cannot be turned on remotelyProblem Check Refer to TroubleshootingConnection URL SetupDirect Information Use Information Message Check Refer to Error messagesInstalled Update on this Incorrect PasswordNo Updates Available Update CorruptedWPS Power PowerLamp Status List To execute, click the Exec button Resetting to the factory settingsDeleting Resetting the connection information Click the Exec button on the rightTo avoid hazards Battery Pack optionalTo prevent damage and prolong service life Updating the firmwareVideo SpecificationsConnectors CameraMPEG-2 TS Stream output formatAC adapter UIA324-12 Pantilter GV-LS2WUPJVC Kenwood Corporation 0812HO-MW-VM