JVC GV-LS2 U manual Use

Page 51

Use

Problem

 

Check

Refer to

 

 

 

 

 

•

Shooting stops automatically as it cannot be

 

 

 

performed for 12 or more consecutive hours.

 

Shooting stopped automatically.

•

The unit stops automatically to protect the circuit

–

 

 

when the temperature rises. Turn off the unit, wait for

 

 

 

a while, and turn it on again.

 

 

 

 

 

A recorded file cannot be found.

•

No file is saved if the playback time is less than one

–

 

second.

 

 

 

 

 

 

 

 

•

"AUTO" of "BRIGHTNESS ADJUST" may not work

 

Brightness changes irregularly.

 

properly depending on the situation, e.g. if there are

page 36

 

 

multiple light sources. Set it up manually.

 

 

 

 

 

The focus is not adjusted

•

If you are recording in a dark place or a subject that

 

 

has no contrast between dark and light, set "FOCUS"

page 36

automatically.

 

 

to "FIXED".

 

 

 

 

 

 

 

 

 

•

Use a high speed SD card (Class 4 or higher).

page 28

 

•

Check if the terminals of the SD card are dirty or

page 46

The motion is choppy.

 

there are too many files. If the card is formatted, the

 

 

write speed may be improved.

 

 

 

 

 

•

Check if the line speed and computer performance

–

 

 

are high enough.

 

 

 

 

 

 

•

Turn on the internal light.

 

Images are dark.

•

Check the "BRIGHTNESS ADJUST" and "GAIN UP"

page 36

 

 

settings.

 

 

 

 

 

The color looks different.

•

Set “WHITE BALANCE” accordingly.

page 36

 

 

 

 

Sound or video is interrupted or

•

Check if the line speed and computer performance

–

slow.

 

are high enough.

 

 

 

 

 

 

 

•

Confirm and update the Operating System of your

 

The computer cannot recognize the

 

computer.

 

•

Windows Vista and Windows 7 may need to be

–

SDXC card.

 

updated.

 

 

 

 

 

•

Mac OS X must be updated to 10.6.5 or later.

 

 

 

 

 

 

•

Set "STREAM 1 / STREAM 2" to

page 44

Data cannot be saved to the SD

 

"MotionJPEG(640x360)/NONE".

 

 

card.

•

When using a new SD card or one that was used with

page 46

 

 

other devices, format the card.

 

 

 

 

 

 

 

Information

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents GV-LS2 Table of Contents Connecting an External Mic Connecting the AV CordNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Component Names and Functions CameraFront Back Bottom Introduction TopPantilter FrontBottom Back Use SettingAddition SetupExample 2 Record birds coming to a feeder on the balcony Example 3 Live-stream a performance in a studioStarting shooting Flow of Connection/SetupConnecting the Camera to Your Computer Required operating environmentAttach the LAN cable to the unit Connecting the AC Adapter List Configuring the initial settingsIP Address Subnet MaskHttp//condigured IP address8000 Configuring the Camera Settings Adjusting the clockSelect Common Settings in Manage Enter USERNAME, PASSWORD, and Password Confirm Setting the user name and passwordClick the Update button on the right Change Administrator USER/PASSWORDSelect an option from MAX Frame Rate MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 720x576/MotionJPEG MPEG-2 TS 1920x1080/MotionJPEGSetting up the Ddns account Select Monitoring Settings in NetworkObtaining a Ddns account Click the ADD button Adding a camera drivers userSubnet Mask Establishing a wired connection to the access pointDefault Gateway Changing the Connection DestinationSelect Wireless Network in Network Connecting to the access point wirelessly Wi-FiUsing the WPS function Searching and connecting to the access pointEnter Password Click the Save button Connecting manuallyConnecting to a computer directly Wi-Fi Direct Click the Save button Select Common Settings in Manage Connecting Multiple CamerasScrew and fix the camera Attaching the PantilterAttaching the Pantilter Push the camera straight downLoosen the camera fixing screw sufficiently Connecting the AC adapterRemoving the pantilter Remove all tape from the pantilterConnect the camera to your computer via the LAN cable Establishing a wired connectionAttach the conversion cable to the stopper of the LAN cable Attach the LAN cable to the unit in numerical orderCompatible SD cards Inserting/Removing an SD CardInserting RemovingApproximate charging times Attaching/Removing the BatteryAttaching ChargingAttaching to the hot shoe Connecting an External MicConnecting to the camera Connecting to the pantilterConnecting the AV Cord Using the Unit Alone Turning on/off the powerStarting/Stopping recording Controlling from a Web Browser LoggingClick the LOG in button Status Controlling the camera Monitor tabMonitor File ManagementReload button Update images Setting button Zoom ratioSD card Configuring the camera settings Delete Managing files stored on the SD card File Management tabUse Folder/File lists TransferLOG in User Checking the message history Status tabCamera NetworkStreaming images Installing JVC CAM ControlUsing the Mobile Terminal Installing the App for mobile terminalsNames of Apps for mobile terminals Information Setting Item ListWired Network Wireless NetworkRegistered Access Point PasswordSSID, Authenticate METHOD, Password Ddns Monitoring SettingsPort Number UPnPStream Settings Stream 1 / StreamMAX Frame Rate MotionJPEG PAN Tilter Settings Camera SettingsMedia Management Common SettingsTurn OFF Camera Power cannot be turned on remotelyTroubleshooting Problem Check Refer toConnection Setup URLDirect Information Use Information Message Check Refer to Error messagesInstalled Update on this Incorrect PasswordNo Updates Available Update CorruptedPower WPS PowerLamp Status List To execute, click the Exec button Resetting to the factory settingsDeleting Resetting the connection information Click the Exec button on the rightTo avoid hazards Battery Pack optionalTo prevent damage and prolong service life Updating the firmwareVideo SpecificationsConnectors CameraMPEG-2 TS Stream output formatAC adapter UIA324-12 Pantilter GV-LS2WUPJVC Kenwood Corporation 0812HO-MW-VM
Top Page Image Contents