JVC GV-LS2 U Connecting manually, Enter Password Click the Save button

Page 22

4Enter "PASSWORD".

5Click the "SAVE" button.

Preparation

The settings to be configured on a browser have been complete. Close the browser, and shutdown the computer.

6Press and hold the power button to power off.

7Disconnect the LAN cable that connects the camera to your computer.

8Set the network mode switch to "WLAN".

9Press and hold the power button to power on. When the "WPS" button stops blinking and stays lit, the connection is complete.

22

Connecting manually

1Select "WIRELESS NETWORK" in "NETWORK".

If the sub settings are not displayed, click "+" on the left of "NETWORK".

2Click the "MANUAL" button.

3Enter the information, and click the "SAVE" button.

The settings to be configured on a browser have been complete. Close the browser, and shutdown the computer.

4Press and hold the power button to power off, and disconnect the LAN cable that connects the camera to your computer.

5Set the network mode switch to "WLAN".

6Press and hold the power button to power on. When the "WPS" button stops blinking and stays lit, the connection is complete.

Image 22

Contents GV-LS2 Table of Contents Connecting the AV Cord Connecting an External MicNetwork CAMERA/PAN Tilter Manage Verifying the Accessories Camera Component Names and FunctionsFront Back Introduction Top BottomFront PantilterBottom Back Setting UseExample 3 Live-stream a performance in a studio SetupExample 2 Record birds coming to a feeder on the balcony AdditionFlow of Connection/Setup Starting shootingRequired operating environment Connecting the Camera to Your ComputerAttach the LAN cable to the unit Connecting the AC Adapter Subnet Mask Configuring the initial settingsIP Address ListHttp//condigured IP address8000 Adjusting the clock Configuring the Camera SettingsSelect Common Settings in Manage Change Administrator USER/PASSWORD Setting the user name and passwordClick the Update button on the right Enter USERNAME, PASSWORD, and Password ConfirmMPEG-2 TS 1920x1080/MotionJPEG Select Stream Settings in NetworkMPEG-2 TS 720x576/MotionJPEG Select an option from MAX Frame Rate MotionJPEGSelect Monitoring Settings in Network Setting up the Ddns accountObtaining a Ddns account Adding a camera drivers user Click the ADD buttonChanging the Connection Destination Establishing a wired connection to the access pointDefault Gateway Subnet MaskSearching and connecting to the access point Connecting to the access point wirelessly Wi-FiUsing the WPS function Select Wireless Network in NetworkConnecting manually Enter Password Click the Save buttonConnecting to a computer directly Wi-Fi Direct Connecting Multiple Cameras Click the Save button Select Common Settings in ManagePush the camera straight down Attaching the PantilterAttaching the Pantilter Screw and fix the cameraRemove all tape from the pantilter Connecting the AC adapterRemoving the pantilter Loosen the camera fixing screw sufficientlyAttach the LAN cable to the unit in numerical order Establishing a wired connectionAttach the conversion cable to the stopper of the LAN cable Connect the camera to your computer via the LAN cableRemoving Inserting/Removing an SD CardInserting Compatible SD cardsCharging Attaching/Removing the BatteryAttaching Approximate charging timesConnecting to the pantilter Connecting an External MicConnecting to the camera Attaching to the hot shoeConnecting the AV Cord Turning on/off the power Using the Unit AloneStarting/Stopping recording Logging Controlling from a Web BrowserClick the LOG in button File Management Controlling the camera Monitor tabMonitor StatusZoom ratio Reload button Update images Setting buttonSD card Configuring the camera settings Transfer Managing files stored on the SD card File Management tabUse Folder/File lists DeleteNetwork Checking the message history Status tabCamera LOG in UserInstalling JVC CAM Control Streaming imagesInstalling the App for mobile terminals Using the Mobile TerminalNames of Apps for mobile terminals Wireless Network Setting Item ListWired Network InformationPassword Registered Access PointSSID, Authenticate METHOD, Password UPnP Monitoring SettingsPort Number DdnsStream 1 / Stream Stream SettingsMAX Frame Rate MotionJPEG Camera Settings PAN Tilter SettingsCommon Settings Media ManagementPower cannot be turned on remotely Turn OFF CameraProblem Check Refer to TroubleshootingConnection URL SetupDirect Information Use Information Error messages Message Check Refer toUpdate Corrupted Incorrect PasswordNo Updates Available Installed Update on thisWPS Power PowerLamp Status List Click the Exec button on the right Resetting to the factory settingsDeleting Resetting the connection information To execute, click the Exec buttonUpdating the firmware Battery Pack optionalTo prevent damage and prolong service life To avoid hazardsCamera SpecificationsConnectors VideoPantilter GV-LS2WUP Stream output formatAC adapter UIA324-12 MPEG-2 TSJVC Kenwood Corporation 0812HO-MW-VM