Sharpness, Custom Gamma, Detail Enhance

3 Operation

Adjustments and settings in the menu (continued)

[1-2-1] Sharpness

Use this function to set video image contours and overall sharpness according to your preference.

Use the UP and DOWN keys to select items. Press the [BACK] key to return to the previous screen.

>> Sharpness
Sharpness	25
Detail Enhance	0

Items	Explanation, operation, precautions, settings
Sharpness	Emphasizes the outlines of video images. Please adjust to your preference.
	Settings: 0 to 50	(clear)
Detail Enhance	It makes minute details of the video images stand out. Please adjust to your preference.
	Settings: 0 to 50	(strong)

[1-2-2] Custom Gamma

Use this function to create your preferred gamma curve.

Select CUSTOM 1, 2 or 3 using the UP and DOWN keys, then press the [OK] key to set and adjust each item. Press the [BACK] key to return to the previous screen.

>> Custom Gamma
Custom1	Correction Value			Normal
Custom2	White	1023
Custom2	Red
Custom3	Red
	Green
	Blue	512
	Reset	0	50	100(%)
		0	50	100(%)

Items			Explanation, operation, precautions, settings
Custom 1~3			[1] It is possible to select a gamma curve adjustment for Custom 1, 2, and 3 under the
			"Gamma" of the picture adjust and then save it.
			Please adjust to your preference.
			(*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture
			Mode" is set to 3D.
			(*) Initial values of Custom 1, 2, and 3 are the same as for "Normal".
			(*) Please refer to the figure at the bottom of the menu in two frames for adjustment.
			(*) It is recommended that you read "Gamma Curve" (Reference page: 74) for hints about
			adjustment.
			adjustment.
	Correction Value		You can choose to add the underlying gamma curve adjustment.
			(*) Can choose any setting, as the default gamma curve will always appear linear.
			Settings: Normal, A, B, C, D
			(brightens in particular dark to intermediate parts) 1.8 to 2.6 (darkens in particular dark to
			intermediate parts) in the range of values with increments of 0.1	[Normal]
	Gamma Adjustment		The gamma curve for "green" is being displayed as being representative. If "white", "red,"
			"green" or "blue" are selected, the corresponding color curves are displayed.
			Place the cursor on a gamma curve with 12 points with the buttons for left and right, and
			then use the buttons for up and down buttons to move those points up or down.

		White	Red, green and blue can be adjusted at the same time.
		White	Red, green and blue can be adjusted at the same time.
		Red	It is possible to adjust the gamma curve of red.
		Green	It is possible to adjust the gamma curve for green.
		Blue	It is possible to adjust the gamma curve for blue.


	Reset		The same data as for the "Normal" mode are used.
			(*) When you exit the adjustment menu of Custom Gamma, please save the adjustment
			values.
			You can return to the original data, which should be saved.