Sharp XG-P610X-N quick start Projecting a Reversed Image, Set to ÒFrontÓ

Projecting a Reversed Image

Projection from behind the Screen

■Place a translucent screen between the projector and the audience.

■Reverse the image by selecting “Rear” in the “PRJ Mode” menu. (See page 62.)

Translucent screen

Audience

Projection Using a Mirror

■Place a mirror (normal flat type) in front of the lens.

■When the translucent screen is placed between the mirror and audience, select “Front” in the “PRJ Mode” menu. (See page 62.)

■When the mirror is placed on the audience side, select “Rear” in the “PRJ Mode” menu. (See page 62.)

Set to ÒFrontÓ Set to ÒRearÓ

Mirror

Translucent screen

Audience Audience

Mirror

Info

•When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected light does not shine into the eyes of the audience.

Ceiling-mount Setup

■It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation.

Before mounting the projector, contact your nearest Sharp Au- thorized Projector Dealer or Service Center to obtain the recom-

mended ceiling-mount adaptor and unit (sold separately).

■Invert the image by selecting “Ceiling + Front” in “PRJ Mode”.

See page 62 for use of this function.

Setup

-23