Connecting the Projector to Other Equipment
Equipment | Terminal on connected equipment | Cable | Terminal on the projector |
Video equipment, |
| ||
Camera, Video game |
|
|
|
| Audio output terminal | RCA audio cable (commercially available) |
|
| Video output terminal | Video cable (commercially available) | VIDEO |
| Audio output terminal | RCA audio cable (commercially available) |
|
Monitor | RGB input terminal | RGB cable (supplied or commercially available) | MONITOR OUT |
Amplifier
Audio output terminal ø3.5 mm stereo minijack to RCA audio cable (commercially available)
MONITOR OUT
Note
•When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.
•Video signal for monitor output is analog RGB signal as well as component signal (COMPUTER1/2). DVI and HDMI input video signals would not be output.
•When the audio from HDMI input is directed to the MONITOR OUT (AUDIO) terminal, output will be generated as Linear PCM audio.
•HDMI
•Because it is compatible with the HDCP
•The HDMI terminal does not support the CEC signal.
This projector is able to process the following signals when connected to HDMI equipment:
•Video signal: For details, see “HDMI Support” in the list of “Computer Compatibility Chart” on page 75.
•Audio signal: Linear PCM audio
•Sampling frequency: 48kHz/44.1kHz/32kHz