Computer Image Adjustment (ÒFine SyncÓ menu)
Menu operation Page 47
5Checking the Input Signal
You can check the input signal information.
6Auto Sync Adjustment
Used to automatically adjust a computer image.
Selectable items | Description | |
Off | Auto Sync adjustment is not automati- | |
cally performed. | ||
| ||
Normal | Auto Sync adjustment will occur when | |
the projector is turned on or when the | ||
| ||
| input signals are switched, when | |
| connected to a computer. | |
High Speed | ||
“Normal” takes more time than “High | ||
| ||
| Speed” for more accurate Auto Sync | |
| adjustment. |
Note
•Auto Sync adjustment is also performed by pressing AUTO SYNC on the projector or on the remote control.
•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.
•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 53.)
•When AUTO SYNC is pressed while “Auto Sync” is “High Speed” or “Off”, Auto Sync will be executed in “High Speed” mode. If the but- ton is pressed again within one minute, Auto Sync will be executed in “Normal” mode.
7Setting the Auto Sync Display Function
Used to set the display during Auto Sync.
Selectable items | Description |
Background | The image set as a background image |
| is projected. See page 58. |
Adjusting Disp. | The computer image being adjusted is |
| displayed. |