Sharp XG-P610X-N quick start Using the Adjustment Feet, Image Projection

Page 32

Image Projection

1 Press H&V LENS SHIFT on the projector or on the remote control.

Pressing ENTER on the projector or on the remote control displays the test pat- tern. Checking the test pattern is useful for more accurate adjustment.

On-screen display

2 Press ', ", \ or on the pro- jector or the remote control to adjust the image position.

Note

When UNDO is pressed, the lens shift reset screen is displayed. Lens shift can be reset to factory default with this screen.

H&V LENS SHIFT button

Mouse/adjustment

button

('/"/\/)

ENTER button

UNDO button

H&V LENS SHIFT button

Adjustment buttons ('/"/\/)

ENTER button UNDO button

Using the Adjustment Feet

When the position of the projected image cannot be adjusted with the lens shift function, use the adjustment feet to adjust the projected angle.

The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined.

Install the projector so that it is as perpendicular to the screen as possible.

1

Rotate the adjustment feet to adjust the projected angle.

The projector is adjustable up to approxi-

Adjustment feet

 

mately 5 degrees.

 

Warning!

Do not hold the lens and lens cover when projector angle is adjusted.

Use caution not to pinch your finger in the space between the adjustment foot and the projector when the projector angle is lowered.

Down

Up

Up

Down

 

 

-30

Image 32
Contents XG-P610X Model No Serial No Special Note for Users in the U.KIntroduction Product Disposal Operation Info Indicates safeguards when using the projectorButtons used in this Contents PreparingReference Setup Manual ContentsFor Macintosh¨ When you want to view the setup manualFor Windows¨ Cleaning AccessoriesPower Sources Power-Cord ProtectionRest your eyes occasionally Avoid locations with extremes of tem- peratureUsing the projector in other countries Temperature monitor functionOptional lens installation Do not block the intake and exhaust ventsOptional accessories AccessoriesSupplied accessories Optional lenses AccessoriesThrow Distance Part Names and Functions ProjectorProjector Rear View Part Names and FunctionsRemote Control Mouse/adjustment button 18 47 //\Using the Remote Control When using the remote controlUsable Range Inserting the BatteriesUsing the Remote Control with a Signal Cable Switching the Remote Control ModeUsing the Remote Control as a Wireless Computer Mouse Using the Remote ControlSwitch on the remote con Trol to the Mouse position Use the mouse functionSetup and Projection Quick StartAdjust the angle Quick StartSetting Up the Projector Setting Up the ProjectorSetting Up the Projector Signal Input Normal ModeSignal Input Stretch Mode F2.5, f=25.5-32 mmProjecting a Reversed Image Set to ÒFrontÓConnecting the Projector to Other Equipment Terminals on the ProjectorVideo equipment Connecting the Projector to Other Equipment VideoWhen connecting to the LAN terminal using a LAN cable Controlling the Projector by a ComputerConnecting the Power Cord Turning the Power Off PutTurning the Projector On/Off Turning the Projector OnImage Projection Shifting the LensImage Projection Using the Adjustment FeetRotate the adjustment feet to adjust the projected angle Adjusting the Focus Adjusting the Projected Image SizeZoom buttons Focus buttons Zoom buttonsPress Keystone on the projector or on the remote control Keystone button Adjustment Button //\Correcting Trapezoidal Distortion Select the type of the keystone correctionGeometric Adjustment Keystone Adjustment with Press , , \ or to correctImage distortion Press Keystone to set the positionSwitching the Input Mode Adjusting the VolumeVolume buttons ButtonsPress Undo on the remote con- trol to cancel the operation Turning Off the Sound TemporarilyDisplaying an Enlarged Portion of an Image Press Magnify on the re- mote controlSelecting the Picture Mode Press Freeze on the remote controlPress Picture Mode on the re- mote control Freeze button Undo button Picture Mode buttonMouse/adjustment button //\ Undo button Resize button Resize ModePress Resize on the remote control About Copyrights VIDEO/DTVDisplaying and Setting the Break Timer Hiding the Projected Image Shutter functionPressing Shutter Open will turn the projected image back on Shutter buttonsMenu Items Following shows the items that can be set in the projectorVIDEO/S-VIDEO Menu Items ÒC.M.S.Ó menuÒAudioÓ menu Status menu Using the Menu Screen Example ÒPictureÓ screen menu for COMPUTER1 RGB modeMenu Selections Press MenuUsing the Menu Screen Press or to select the item you want to adjustPress \ or to adjust the item selected Press EnterSelect a picture mode before adjusting the im- age Picture Adjustment Picture menuAdjusting the Image Make sure to set Òdnró to ÒOffÓ in the following cases Picture Adjustment ÒPictureÓ menuReducing Image Noise DNR Selecting the Signal Type When COMPUTER1/2 is selected for the input modeWhen DVI is selected for the input mode Selecting the Dynamic RangeColor Management System C. M. S. menu Computer Image Adjustment Fine Sync menu Adjusting the Computer ImageSaving Adjustment Settings Accessing Adjustment SettingsChecking the Input Signal Auto Sync AdjustmentSetting the Auto Sync Display Function Computer Image Adjustment ÒFine SyncÓ menuAudio Adjustment ÒAudioÓ menu Adjusting the AudioSetting the Audio Output Type Setting the SpeakerDisplaying Dual Pictures Pict in Pict Using the ÒOptions 1Ó MenuSetting the Resize Mode Setting On-screen Display Setting the Video SystemShifting the Projected Image Vertically Digital Shift Capturing Projected ImagesDetecting the Input Signals Automatically Setting the Eco ModeSetting the Auto Power Off Function Selecting the Background ImageSetting the System Lock Function When the System Lock is setSelect System Lock on the Op- tions 1 menu, then press Enter the same keycode in Recon- firmUsing the ÒOptions 1Ó Menu Enter the same keycode in ÒRecon- firmÓSelect ÒPasswordÓ from the ÒOptions 2Ó menu, and press Setting a PasswordIf You Forget Your Password Setting the Lamp Mode Controlling Multiple Projectors with the One Remote ControlHelpful Functions Set during Installation Options 2 menu Selecting the Lens TypeShortcut to Make Projector Stack Settings Selecting the Fan ModeSetting the Auto Restart Function Bypassing Unused Input SelectionsSetting the Monitor Output Setting the LAN/RS232CSetting the Dhcp Client Helpful Functions Set during Installation ÒOptions 2Ó menuSetting the TCP/IP Service Mode Returning to the Default SettingsOverview of All Menu Settings and the Lamp Life Selecting the On-screen Display LanguageMaintenance Cleaning the projectorCleaning the air vents and the intake vent cover Cleaning the lensRemove the filter cover Cleaning and Replacing the Dust FiltersCleaning the Dust Filters Replace the filter cover Cleaning and Replacing the Dust FiltersReplacing the Dust Filters About the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Maintenance Indicators Replacing the Lamp Regarding the LampLamp Remove the lamp unit cover Removing and Installing the Lamp UnitRegarding the Lamp User service screw Remove the lamp unitInsert the new lamp unit Replace the lamp unit coverResetting the Lamp Timer Connect the power cordReset the lamp timer Reset the lamp timer after replacing the lampComputer Compatibility Chart ComputerComputer Compatibility Chart DTVAttaching the Optional Lens Remove the lens coverAttaching the Optional Lens Slide and attach the lens coverTroubleshooting Remote control batteries have run outTroubleshooting See Maintenance IndicatorsFor Sharp Assistance Specifications HdmiAdvanced intelligent compression All Reset Area zoom IndexSharp Corporation