Hiding the Projected Image (Shutter function)
This function allows you to tempo- rarily hide the projected image.
1 Press SHUTTER CLOSE.
•The projected image is hidden.
2 Pressing SHUTTER OPEN will turn the projected image back on.
Note
In the following cases, hiding will be cancelled automatically.
•When STANDBY on the projector or on the remote control is pressed.
•When a caution or information message is displayed.
•When the power is turned on.
SHUTTER buttons
Displaying and Setting the Break Timer
This function allows you to show the re- maining time for break during meeting.
1 Press BREAK TIMER.
2 While“
”is displayed, press ', ", \ or to set the break timer.
•You can set anywhere between 1 and 60 minutes (in 1 units).
•The break timer starts to count down as soon as ', ", \ or is pressed.
Note
•Pressing UNDO will cancel the break timer.
•Auto Power Off function will be temporarily dis- abled during the break timer.
When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if the break timer has elapsed.
•The break timer will be displayed on the startup image. To change the screen dis- played during the break timer, change the setting of “Startup Image” (see page 58).
•When “Slave” is set for “Stack Setting”, the break timer is not displayed. (See page 62.)
Mouse/adjustment | Basic | |
button | ||
| ||
('/"/\/) | Operation | |
UNDO button | ||
| ||
BREAK TIMER |
| |
button |
| |
|