General use | TANDBERG Videoconferencing System |
|
|
Sending and receiving snapshots
When a snapshot is sent, received or requested, it will be stored in the graphics memory. When a new image is sent or received, the old image will be erased. When disconnecting the call, the image will be erased.
Sending a snapshot
snapshot • Press SNAPSHOT.
NOTE
WHEN IN A MCU CONFERENCE AS MULTISITE HOST OR CONNECTED TO AN EXTERNAL MCU, SENDING A SNAPSHOT WILL AUTOMATICALLY INITIATE A FLOOR REQUEST.
• To send a snapshot from another video source (e.g. the document camera), select source:
main cam | aux | doc cam | vcr | pc |
TIP
•Press SNAPSHOT.
SEE ‘PRESENTATIONS’ MENU FOR AUTOMATIC SETUP OF THIS OPERATION.
Viewing a snapshot
The last sent or received snapshot will automatically be displayed on your screen.
• Press SELFVIEW to return to normal view.
NOTE
REQUIRES
Receiving a snapshot
A received snapshot will automatically be displayed on your screen.
• Press SELFVIEW to return to normal view.
NOTE
REQUIRES
Requesting a snapshot
•Press FAR END until the ‘FarEndCamera’ on screen indicator is displayed.
•Press SNAPSHOT . A snapshot from the far end is automatically displayed.
36