TANDBERG D12155-10 user manual MultiSite MCU

Page 39

TANDBERG Videoconferencing System

General use

 

 

MultiSite (MCU)*

The system has a built-in multipoint conference unit (MCU), MultiSite, which has the capability to establish meetings with up to 4 video sites (5 if at least one site is a telephone call, ISDN/analogue/mobile).

The video calls in a conference must be connected using the same bandwidth.

TIP

A conference can consist of any combination of ISDN/

LAN sites.

It is possible to have telephone meetings with up to 5 participants.

The MultiSite supports both Voice Switched and Continuous Presence mode (see ‘MCU Services’ in ‘Advanced use’ for description of these modes).

Establishing a conference is done by first making a call to one site. When a call is established with the first site, the other sites are connected one by one.

It is possible to either dial out to the sites or the sites can dial in to the MultiSite.

Both ISDN, IP and mixed ISDN/IP conferences can be encrypted if all systems supports encryption.

SEE ‘UTILITIES’, ‘CONTINUOUS PRESENCETO CHANGE MODE.

For encrypted calls, there is also a maximum bandwidth of 768 Kbps for the whole conference. This means that a 3 site conference will have a maximum bandwidth of 384Kbps per connection, while a 4 site conference will have a maximum bandwidth of 256 Kbps per connection.

NOTE

THE SYSTEM SUPPORTS MIXED MULTISITE WITH V.35 AND IP, BUT THE IP SITE MUST BE ADDED AFTER THE V.35 IS UP AND RUNNING.

MULTISITE - WHICH QUALITY CAN BE USED ON EACH SITE?

NO OF SITES

 

 

BANDWIDTH

4 SITES

3 SITES

768 KBPS

256

384

1152 KBPS

384

512

1536 KBPS

512

768

NOTE - 4 SITES INDICATES YOURSELF + THREE OTHER SITES.

* - Optional feature.

39

Image 39
Contents UserManual Tandberg Videoconferencing System Trademarks and copyright Environmental IssuesOperator Safety Summary Contents Advanced use Peripheral EquipmentAppendices 104 Index 114 TIP IntroductionLAN Menu structureAt a glance the Tandberg 2500 system Tandberg 2500 Videoconferencing SystemV.E. II Camera MonitorsCodec Cabinet Remote controlTable microphone Installation PrecautionsUnpacking Page Microphone cable Connecting cablesPower cable Monitor cablesLAN cable Monitor configuration5a. Isdn cables using BRI interface 5b. Other networks using the External Network interfaceMenu System configurationIsdn configuration LAN configuration Getting started System start-upWelcome menu Basics Making a call Making and ending callsTIP Selecting / setting default quality bandwidth Selecting / setting default network Answer a call End a callCorrecting keying mistakes Press D Irectory to bring up the following menu DirectoryAdd New Entry Edit EntryDelete Entry Add Site Add MultiSite EntryMicrophone on/off Adjusting volumeGeneral use View outgoing video selfviewOn Screen Symbols Do Not Disturb / Sleep ModeMoving / zooming camera Focusing cameraControlling the Main Camera Selecting video sourcesVoice Activated Camera Positioning Presets Selecting presetsStoring presets Far end camera control Fecc Receiving a snapshot Sending and receiving snapshotsSending a snapshot Viewing a snapshotAdd Duo Video Duo VideoEnd a Duo Video call MultiSite MCU MultiSite cascading Establishing MultiSite meetings using DirectoryAdding an extra site dial out Adding an extra site dial Disconnecting sites from a conferencePC SoftPresenter PC PresenterText Chat / Closed Captioning Web-interfaceOther PC applications StreamingSnapshots Menu Password Advanced useMain menu Call quality Qcif Advanced call qualityDuo Video Quality Presentation ModeDuo Video Mode PresentationsSnapshot Filter Duo Video NumberDuo Video / Snapshot Source Auto-Display SnapshotDual Monitor UtilitiesAutoanswer Far end camera controlMCU status line Auto-PIPWelcome Menu Continuous PresenceWeb Snapshots MCU services Quick Menu View site # Request floorRelease floor Terminal NamesChair control Audio Inputs Audio SettingsPage Audio Outputs Level Settings Out1 +13.5dB Out2AUX Out3VCR Previous MenuEcho Control Page Automatic Gain Control AGC Settings Restore Audio Defaults Alert Tones & VolumeVideo Settings Camera Tracking ModeDocument Camera Video Name FocusBrightness WhitebalanceVGA Settings VNC Settings Network Configuration Terminal SettingsISDN-BRI Settings Spids This Service has Limited Access on Some Isdn Networks Parallel dial External network settings 35/RS-366 cable LAN Settings Page Settings Page Rsvp Advanced H.323 SettingsQoS Type IP PrecedenceDiffserv IP Settings Snmp Settings Incoming telephone calls Call SettingsAccess Code Incoming MCU callsEncryption Secure Conference Encryption ModeNetwork Profiles Max Call LengthDataport configuration Page Software Options LanguageDiagnostics System infoChannel status TIP Call status Restore defaultsView current settings Test subsystemIP Address Conflict Check Interfaces Peripheral EquipmentE2 only XGA monitor Dual MonitorDocument camera Multiple controllable cameras Tracker AudioScience microphoneVideo Cassette Recorder VCR VCR PlaybackVCR Recording Extra fixed cameras Telephone Add-OnPC applications Additional microphones Tandberg AppendicesUsing Telesync TS-256 SW56/ISDN adapter Appendix 2 Connecting the system to the Switched 56 networkBackground Loudspeaker volumeAppendix 3 Environmental considerations Iris control and lightingHow to prepare a typical room for videoconferencing Guidelines for setting up videoconferencing roomsAppendix 4 Using the file system Custom logos · Go to the folder where your logo is located ABC Appendix 6 Security111 112 Appendix 6 Declaration of Conformity Fecc IndexTandberg Videoconferencing System Index Current settings 93 outgoing video 30 Viewing a still image