TANDBERG D12155-10 user manual IP Settings

Page 82

Advanced use

TANDBERG Videoconferencing System

IP Settings

NOTE

CHANGES IN THIS MENU WILL NOT HAVE

ANY EFFECT BEFORE THE SYSTEM IS RESTARTED.

IP-assignment

DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.

DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by the DHCP server.

Static: The codec’s IP-address and IP-subnet mask must be specified in the IP-address field.

IP-address

IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode, the assigned IP-address can be found on the Welcome Menu.

IP-subnet mask

IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-administrator will provide the correct value for this field.

Gateway

When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP address, subnet mask, and default gateway must be specified by the LAN administrator.

82

Image 82

Contents UserManual Tandberg Videoconferencing System Environmental Issues Trademarks and copyrightOperator Safety Summary Contents Peripheral Equipment Advanced useAppendices 104 Index 114 Introduction TIPMenu structure LANTandberg 2500 Videoconferencing System At a glance the Tandberg 2500 systemMonitors V.E. II CameraCodec Remote control CabinetTable microphone Precautions InstallationUnpacking Page Monitor cables Connecting cablesPower cable Microphone cable5b. Other networks using the External Network interface Monitor configuration5a. Isdn cables using BRI interface LAN cableSystem configuration MenuIsdn configuration LAN configuration System start-up Getting startedWelcome menu Basics Making and ending calls Making a callTIP Selecting / setting default quality bandwidth Selecting / setting default network End a call Answer a callCorrecting keying mistakes Directory Press D Irectory to bring up the following menuEdit Entry Add New EntryDelete Entry Add MultiSite Entry Add SiteView outgoing video selfview Adjusting volumeGeneral use Microphone on/offDo Not Disturb / Sleep Mode On Screen SymbolsSelecting video sources Focusing cameraControlling the Main Camera Moving / zooming cameraVoice Activated Camera Positioning Selecting presets PresetsStoring presets Far end camera control Fecc Viewing a snapshot Sending and receiving snapshotsSending a snapshot Receiving a snapshotDuo Video Add Duo VideoEnd a Duo Video call MultiSite MCU Establishing MultiSite meetings using Directory MultiSite cascadingAdding an extra site dial out Disconnecting sites from a conference Adding an extra site dialPC Presenter PC SoftPresenterWeb-interface Text Chat / Closed CaptioningStreaming Other PC applicationsSnapshots Advanced use Menu PasswordMain menu Call quality Advanced call quality QcifPresentations Presentation ModeDuo Video Mode Duo Video QualityAuto-Display Snapshot Duo Video NumberDuo Video / Snapshot Source Snapshot FilterFar end camera control UtilitiesAutoanswer Dual MonitorContinuous Presence Auto-PIPWelcome Menu MCU status lineWeb Snapshots MCU services Quick Menu Terminal Names Request floorRelease floor View site #Chair control Audio Settings Audio InputsPage Level Settings Out1 +13.5dB Out2AUX Out3VCR Previous Menu Audio OutputsEcho Control Page Automatic Gain Control AGC Settings Alert Tones & Volume Restore Audio DefaultsCamera Tracking Mode Video SettingsDocument Camera Whitebalance FocusBrightness Video NameVGA Settings VNC Settings Terminal Settings Network ConfigurationISDN-BRI Settings Spids This Service has Limited Access on Some Isdn Networks Parallel dial External network settings 35/RS-366 cable LAN Settings Page Settings Page Advanced H.323 Settings RsvpIP Precedence QoS TypeDiffserv IP Settings Snmp Settings Incoming MCU calls Call SettingsAccess Code Incoming telephone callsEncryption Mode Encryption Secure ConferenceMax Call Length Network ProfilesDataport configuration Page Language Software OptionsSystem info DiagnosticsChannel status TIP Restore defaults Call statusTest subsystem View current settingsIP Address Conflict Check Peripheral Equipment InterfacesE2 only Dual Monitor XGA monitorDocument camera Multiple controllable cameras AudioScience microphone TrackerVCR Playback Video Cassette Recorder VCRVCR Recording Telephone Add-On Extra fixed camerasPC applications Additional microphones Appendices TandbergAppendix 2 Connecting the system to the Switched 56 network Using Telesync TS-256 SW56/ISDN adapterIris control and lighting Loudspeaker volumeAppendix 3 Environmental considerations BackgroundGuidelines for setting up videoconferencing rooms How to prepare a typical room for videoconferencingAppendix 4 Using the file system Custom logos · Go to the folder where your logo is located Appendix 6 Security ABC111 112 Appendix 6 Declaration of Conformity Index FeccTandberg Videoconferencing System Index Current settings 93 outgoing video 30 Viewing a still image