TANDBERG Videoconferencing System | Advanced use |
Dataport configuration
The system provides two standard RS232 serial ports to allow a computer to be connected for data transfer and control purposes.
NOTE
WHEN CONNECTING TO A PC THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH RS232 CABLE.
Dataport 1
If you wish to connect a PC to Dataport 1, you must ensure that the PC and the system are identically configured. The available settings are:
Dataport 1 supports 4 different modes:
Data mode
Provides a transparent data channel. This channel can be used for many different purposes such as file transfer, application sharing and more. When using this mode, it is necessary to have a TANDBERG system at the far end.
Control mode
The control interface provided by the Dataport supports a subset of the Hayes command set as well as a comprehensive set of system specific commands.
This mode maintains communication with the Dataport’s command interpreter at all times. All features available from the
Modem
Allows you to control the system externally via a PC as in Control Mode. Once a call is established, Dataport 1 will automatically switch to Data mode. When the call disconnects, Dataport 1 switches back to Control Mode.
T.120
Provides a data channel supporting the T.120 standard for data communication. Using T.120 software on your PC, you can communicate with other T.120 systems using your PC and your system.
87