Seiko Group TM-L60 manual Command Descriptions, Commands, Command descriptions XXX Command

Page 32

6-2 Command Descriptions

nCommand descriptions XXX Command

[Name]	The name of the command.
[Format]	The code sequence.
	In this description, < > H denotes hexadecimal numbers, < > de-
	notes decimal numbers and < > B denotes binary numbers.
	[ ] k indicates the contents of the [ ] should be repeated k times.
[Range]	The allowable range for the arguments.
[Description]	Description of the command function.
[Notes]	(Included only when necessary.)
[Default]	The default values for the commands.
[Reference]	Related commands.
[Example]	Example of using the commands.

6-3 Commands

HT

[Name]	Horizontal tab
[Format]	<09> H
[Description]	Moves the print position to the next horizontal tab position.
	• This command is ignored unless the next horizontal tab position
	has been set.
[Notes]	• Horizontal tab positions are set using ESC D.
	• The default horizontal tab positions are at intervals of 8 char-
	acters (9th column, 17th, 25th ...) for Font A.
[Reference]	ESC D

26

Image 32

Contents L 6 Page CC Class a FCC Compliance Statement for American Users Introduction Contents Appendix a General Specifications Setting UP 1Checking the Contents of the Box Unpacking the PrinterChoosing a Place for the Printer Removing the Protective Material4Names and Functions of Parts Part namesPower green Error redOperation panel Paper redConnecting the Power Supply to the Printer Plugging in AC adapterConnecting the Host Computer to the Printer Connecting the interface cableInstalling the Roll Paper Installing the roll paperPaper Slot Paper-end detector Adjusting the Paper-end DetectorHow to adjust the paper-end detector Page Setting the DIP switches Setting the DIP SwitchesLocating the DIP switches Print Density Selection DIP-Switch Functions DIP-switch FunctionsBaud Rate Selection 1Checking Operation with the Self Test II. Reference Paper-feed switch 1Panel Switches and CommandsSwitches Power switch Label paper Printable Area and Label Paper ConditionsPrintable area Miscellaneous Notes Page Error Correction Error LED redError Display Be inspectedCommand Standby State Display ON/OFF Timing Pattern RecoveryCleaning the Head Cleaning the headCover-open detector Cover-open DetectorRemoving Jammed Paper Controlling the printer with commands How to use this tableCommand descriptions XXX Command Command DescriptionsCommands ESC SP n ESC ! nESC $ n1 n2 ESC % n ESC & s n m ap s Xam-n+lESC * m n1 n2 d k = n 1 + 2 5 6 X n 2 m = 0Vertical Direction Horizontal Direction ESC 3 n ESC = nESC @ ESC D nkNULESC E n RangeESC G n ESC J nESC R n ESC V nESC a n ESC ¥ n1 n2ESC n ESC c 4 n PositionESC d n ESC p m n1 n2ESC c 5 n ESC t n ESC u nESC Journal near-end GS FF GS*n1n2dn1xn2x8GS/m Dot DensityGS a m n PER Feed switch or turning the power on GS C 0 m nGS C1 n1 n2 n3 n4 n5 n6 GS Cl, GS C2, GS c, GS CGS C2 n1 n2 T h c o u n t d o w nGSC N1 N2 N3 N4 N5 To stop countingGS H n With counting downGS f n With counting upGS w n GS k n d k NULGS n1 n2 n3 How to write program Printing on the roll paper Program DescriptionsIntroduction Before printingSend Print Data Initialize printer again Printing bar codes GS H nRS-232C must be closed using this command Sample Program onto thermal paper Printing on label paper Sample Program onto thermal label paper Characters specifications Appendix a General SpecificationsPrinting specifications Near-end detector Paper Thermal paperThermal label paper Electrical characteristics EMI by using Epson PS-130External dimensions and weight ReliabilityAppendix B Connectors Signal Name Sender Specifications RS-232C compatible Appendix C InterfacesPin Number Signal Name Signal Direction Function Serial interface timingPage Page International character set Appendix E Command Summary Command NameGS C GS C2