Seiko Group TM-L60 manual Introduction

Page 4

INTRODUCTION

The TM-L60 is a available as a simplificative bar code printer for the following uses:

•One-station printer for ECR and POS use

•Output device for scaling or measuring

•Ticket issuing device

•Small scale instore-marking

The TM-L60 has the following features:

•Either label paper or thermal paper is selectable.

•A light, ultra-compact printer.

• High speed printing:

12 lines/second (12 X 24 font).

•Low noise thermal printing.

•High reliability due to a stable mechanism.

•Easy maintenance, such as head cleaning.

•The command protocol is based on ESC/POW™, a widely used standard.

•The interface cable, drawer control cable, and power cable can be routed in any of four directions: both sides, underneath, and out the back of the case.

•The power switch is on a panel in front of the printer body, providing easy operation, so both side and the back are still available.

•Barcode (UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), CODE39, ITF, CODABAR) printing is possible using a bar code command.

•Characters can be rotated 90°.

•Repeated operation and copy printing are possible by macro definition.

•2 drawer controls are possible using the drawer kick-out interface.

•Since label paper can be ejected by label eject command, it is not necessary to feed more paper than required.

•Easy label insertion.

•Serial number is possible on label papers.

Please be sure to read the instructions in this manual carefully before using your new Epson printer.

Image 4

Contents L 6 Page CC Class a FCC Compliance Statement for American Users Introduction Contents Appendix a General Specifications Setting UP 1Checking the Contents of the Box Unpacking the PrinterChoosing a Place for the Printer Removing the Protective Material4Names and Functions of Parts Part namesPower green Error redOperation panel Paper redConnecting the Power Supply to the Printer Plugging in AC adapterConnecting the Host Computer to the Printer Connecting the interface cableInstalling the Roll Paper Installing the roll paperPaper Slot How to adjust the paper-end detector Adjusting the Paper-end DetectorPaper-end detector Page Locating the DIP switches Setting the DIP SwitchesSetting the DIP switches Baud Rate Selection DIP-Switch Functions DIP-switch FunctionsPrint Density Selection 1Checking Operation with the Self Test II. Reference Switches Power switch 1Panel Switches and CommandsPaper-feed switch Printable area Printable Area and Label Paper ConditionsLabel paper Miscellaneous Notes Page Error Correction Error LED redError Display Be inspectedCommand Standby State Display ON/OFF Timing Pattern RecoveryCleaning the Head Cleaning the headRemoving Jammed Paper Cover-open DetectorCover-open detector Controlling the printer with commands How to use this tableCommands Command DescriptionsCommand descriptions XXX Command ESC SP n ESC ! nESC $ n1 n2 ESC % n ESC & s n m ap s Xam-n+lESC * m n1 n2 d k = n 1 + 2 5 6 X n 2 m = 0Vertical Direction Horizontal Direction ESC 3 n ESC = nESC @ ESC D nkNULESC E n RangeESC G n ESC J nESC R n ESC V nESC n ESC ¥ n1 n2ESC a n ESC c 4 n PositionESC c 5 n ESC p m n1 n2ESC d n ESC t n ESC u nESC Journal near-end GS FF GS*n1n2dn1xn2x8GS/m Dot DensityGS a m n PER Feed switch or turning the power on GS C 0 m nGS C1 n1 n2 n3 n4 n5 n6 GS Cl, GS C2, GS c, GS CGS C2 n1 n2 T h c o u n t d o w nGSC N1 N2 N3 N4 N5 To stop countingGS H n With counting downGS f n With counting upGS w n GS k n d k NULGS n1 n2 n3 How to write program Printing on the roll paper Program DescriptionsIntroduction Before printingSend Print Data Initialize printer again Printing bar codes GS H nRS-232C must be closed using this command Sample Program onto thermal paper Printing on label paper Sample Program onto thermal label paper Printing specifications Appendix a General SpecificationsCharacters specifications Near-end detector Paper Thermal paperThermal label paper Electrical characteristics EMI by using Epson PS-130External dimensions and weight ReliabilityAppendix B Connectors Signal Name Sender Specifications RS-232C compatible Appendix C InterfacesPin Number Signal Name Signal Direction Function Serial interface timingPage Page International character set Appendix E Command Summary Command NameGS C GS C2