Sharp XV-Z30000 appendix Other connected equipment, Using the projector in other countries

Page 11

Caution regarding usage of the projector

■If you are not to use the projector for a long time or before moving the projector, make certain you unplug the power cord from the wall outlet, and disconnect any other cables connected to it.

■Do not carry the projector by holding the lens.

■When storing the projector, ensure you attach the lens cover to the projector.

■Do not expose the projector to direct sunlight or place next to heat sources. Doing so may affect the cabinet color or cause deformation of the plastic cover.

Other connected equipment

■When connecting a computer or other audio-visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected.

■Please read the operation manuals of the projector and the equipment to be connected for instructions on how to make the connections.

Using the projector in other countries

■The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in.

When using the projector overseas, make sure you use an appropriate power cord for the country you are in.

Temperature monitor function

■If the temperature inside the projector increases, due to blockage of the air vents, or the setting location, the temperature

warning indicator will blink. And if the

temperature keeps on rising, “” will illuminate in the lower left corner of the picture with the temperature warning indicator blinking. If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter Standby mode. Refer to “Maintenance Indicators” on pages 76 and 77 for details.

Info

•The cooling fan regulates the internal temperature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunction.

Introduction

9

Image 11

Contents XV-Z30000 Model No Serial No Void the users authority to operate this equipment See bottom of projectorSharp Plaza, Mahwah, New Jersey TEL 1-800-BE-SHARP InformationFor Future Reference Using the Menu ScreenContents Reference Adjusting the Projector Function PRJ-ADJ MenuPower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Observe the following safeguards when using the 3D Glasses For Macintosh When you want to view the Setup ManualFor Windows Optional accessories AccessoriesPart Names and Functions Power indicator Lamp indicator Temperature warning indicatorRear View Terminals Using the Kensington LockIntroduction Inserting the Batteries Ensure that you do not drop it or expose it to Remote control sensor 33 n 10 mUsable Range Easy Start Setup and ProjectionControl On the remote controlStandard Setup Front Projection Setting Up the ProjectorVideo Setup Setting Up the ProjectorFormula for picture size and projection distance Screen Size and Projection DistanceCeiling-Mount Setup Projection PRJ ModeTerminals on the Projector Connecting the Projector to Other EquipmentConnecting to Video Equipment Connecting to a computer using the RGB cable Connecting to a ComputerControlling the Projector by a Computer AC socket Power cord supplied To AC outlet Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable Turning the Projector On Turning the Projector On/OffROn-screen display Press H&V Shift on the remote controlImage Projection Shifting the LensRotate the adjustment feet to adjust the projected angle Using the Adjustment FeetAdjusting the Focus Adjusting the Projected Image SizePress Keystone Press P/R/O/Q to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Geometric Adjustment Press Keystone to set the position Press P/R to select H&V KEYSTONE, and then pressPress P or R to parallelize Left and right sidesSphere correction Press P/R/O/Q to adjustPress Keystone to set theAdjustment with R/O position Press P/R to select SPHERE, and then press EnterHdmi 1/2, Component and Computer buttons Switching the Input ModeInput list Press Resize on the remote control or on the projector Resize ModePress image adjustment buttons Operating with the Remote ControlAdjusting the Image Selecting the Picture ModeHiding the Menu Temporarily Menu Hide Switching the Iris SettingAuto Sync Auto Sync Adjustment Switching the Eco+Quiet ModePicture menu Menu ItemsRGB 3D Menu Press Menu Using the Menu ScreenMenu Selections Adjustments Press Q or O and select Picture to adjustPress Enter To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedMenu operation n Picture Adjustment Picture Menu Selecting the Picture Mode Eco+Quiet Adjusting the Image Switching the Iris Setting Using the AdvancedPicker Adjusting the ColorsAdjust the curve to adjust the image brightness Custom GammaS. color adjustment screen Resetting All Adjustment Items Adjusting the Bright BoostSelecting the Film Mode Setting Detail EnhancementSetting the Resolution Computer Image Adjustment SIG-ADJ MenuSignal Info Signal Type SettingSetting the Video Setup Adjusting the Dynamic RangeTrigger Adjusting the Projected Image SCR-ADJ MenuSetting the Resize Mode 2Adjusting the Image PositionBlack Mask Adjusting the Projected Image SCR-ADJ Menu ContinueAdjusting the Overscan Setting On-screen DisplaySelecting the On-screen Display Language See page 22 for details of Projection PRJ ModeSelecting the Menu Screen Position Reversing/Inverting Projected ImagesEconomy Mode Setting No Operation Off ModeSetting the Power Save Mode Economy Mode Setting the Input Terminal Names Input Name Setting One Touch PlaySetting the One-Touch Playback Function One Touch Play Setting the System Standby Function System StandbyTurning LED Off Adjusting the Projector Function PRJ-ADJ Menu Setting the Demo Mode Fan Mode Setting Lamp Timer Life Returning to the Default SettingsOn the projector, press Setting Up the Projector Network Environment Network MenuSetting a Password Select Password, then press QEnter IP Address using P, R, Q and O, then press Enter Dhcp Client SettingTCP/IP Setting Returning to Default Settings NetworkYou can conﬁrm the following items Conﬁrming the Projector InformationEnjoying 3D Image Viewing Precautions on using the 3D GlassesPrecautions on installing the IR emitter As you get more comfortable viewing 3D images Precautions on viewing 3D imagesEpilepsy Part Names Supplied Accessories for the 3D GlassesClose the battery cover Before Using the 3D GlassesReplacing the Button Cell Battery Remove the button cell batteryAttaching the 3D Glasses Band Using the 3D GlassesAttaching the Nose Pad To 3D Synchro terminal IR emitter cable Connecting the IR Emitter to the ProjectorInstall the IR emitter unit to the stand Position the IR emitterTurn on the 3D Glasses and place them over your eyes When 3D Auto Change is set to NoWhen 3D Auto Change is set to Yes Viewing 3D ImagesPress P/R to select 3D Press O/Q to select On or Off Press 3D MenuViewing Time Info 3D Depth Adjust3D Auto Change 3D FormatSetting the 3D Format Menu 3D Glasses lenses S 0 8 B Manufacture number Color Speciﬁcations 3D GlassesEffective Distance DimensionsCleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lens or lens coverAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Lamp unit Removing and Installing the Lamp UnitDisconnect the power cord Remove the lamp unit coverResetting the Lamp Timer Computer Compatibility ChartDTV 23-27 TroubleshootingProblem Check 68-70 For Sharp Assistance Hdmi SpeciﬁcationsDimensions Index