Sharp XV-Z30000 Adjusting the Projected Image SCR-ADJ Menu Continue, Adjusting the Overscan

Menu operation n Page 42

Adjusting the Projected Image (“SCR-ADJ” Menu) (Continue)

5 Adjusting the Overscan

This function allows you to adjust the Overscan area (display area).

Selectable	Description
items
On	The input area is displayed without
	screen edges.
Off	The whole input area is displayed.

Note

•You can adjust the Overscan area for the following input signals and the RESIZE function. Input signal:

-480I /480P

-540P

-576I/576P

-720P

-1035I

-1080I /1080P

RESIZE function:

-NORMAL

-16:9

-CINEMA ZOOM

-ZOOM 14:9

•If the display area ratio is set too large, noise may appear at the screen edges. If this happens, set the display area ratio to a smaller value.

•Also read “About Copyrights” on page 36.

6 Black Mask

This function allows you to apply a black mask around the outside of the image to hide flicker on the edges. Select a level from 0 (%) to 5 (%).

7CBNR

This function reduces the color break noise.

Selectable	Description
items
On	The CBNR function is activated.
Off	The CBNR function is not activated.

Note

•When “3D” is set to “On”, the CBNR function is disabled.

•When “CBNR” is set to “On”, the brightness is reduced.

8Setting On-screen Display

Selectable	Description
items
On	All on-screen displays are displayed.
Off	INPUT/AUTO SYNC/RESIZE/
	CONTRAST/BRIGHTNESS/COLOR/
	TINT/ECO+QUIET/3D ON/OFF (3D/2D
	mode change) message are not
	displayed.

Setting the Brightness of the Menu Screen

Sets the brightness of the menu screen.

Selectable	Description
items
Standard	Standard brightness
Level 1	Darker than the “Standard” brightness
Level 2	Darker than the “Level 1” brightness

0Selecting the Background Image

Selectable	Description
items
Logo	SHARP logo screen
Blue	Blue screen
None	— (Black screen)

52