Sharp XV-Z30000 appendix Switching the Iris Setting, Hiding the Menu Temporarily Menu Hide

Page 40

Operating with the Remote Control (Continued)

Switching the Iris Setting

This function controls the quantity of the projected light and the contrast of the image.

Press IRIS 1 or 2.

Each time the button is pressed while the display is on, the mode changes in the following order:

IRIS 1 High Brightness High Contrast

IRIS 2 On Off

Hiding the Menu Temporarily (Menu Hide)

When the menu screen is displayed, you can temporarily hide the menu screen by pressing and holding MENU HIDE on the remote control. This is useful when, for example, checking the video adjustment information.

Note

• For details, see page 45.

Auto Sync

(Auto Sync Adjustment)

Auto Sync function works when detecting input signal after the projector turns on.

Press AUTO SYNC to manually adjust with Auto Sync function.

Note

When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 49.)

Switching the Eco+Quiet Mode

Press ECO+QUIET to switch the Eco+Quiet mode between on and off.

When the Eco+Quiet Mode is set to “On”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.

Note

• Refer to “Eco+Quiet” on page 45 for details.

38

Image 40
Contents XV-Z30000 Model No Serial No See bottom of projector Void the users authority to operate this equipmentInformation Sharp Plaza, Mahwah, New Jersey TEL 1-800-BE-SHARPUsing the Menu Screen For Future ReferenceContents Adjusting the Projector Function PRJ-ADJ Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Observe the following safeguards when using the 3D Glasses For Windows When you want to view the Setup ManualFor Macintosh Accessories Optional accessoriesPower indicator Lamp indicator Temperature warning indicator Part Names and FunctionsUsing the Kensington Lock Rear View TerminalsIntroduction Inserting the Batteries Usable Range Remote control sensor 33 n 10 mEnsure that you do not drop it or expose it to Setup and Projection Easy StartOn the remote control ControlSetting Up the Projector Video SetupSetting Up the Projector Standard Setup Front ProjectionScreen Size and Projection Distance Formula for picture size and projection distanceProjection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment Terminals on the ProjectorConnecting to Video Equipment Connecting to a Computer Connecting to a computer using the RGB cableControlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket Power cord supplied To AC outlet Turning the Projector On/Off Turning the Projector OnPress H&V Shift on the remote control Image ProjectionShifting the Lens ROn-screen displayUsing the Adjustment Feet Adjusting the FocusAdjusting the Projected Image Size Rotate the adjustment feet to adjust the projected angleCorrecting Trapezoidal Distortion Press P/R/O/Q to adjust Keystone CorrectionPress Keystone Geometric Adjustment Press P/R to select H&V KEYSTONE, and then press Press P or R to parallelizeLeft and right sides Press Keystone to set the positionPress P/R/O/Q to adjust Press Keystone to set theAdjustment with R/O positionPress P/R to select SPHERE, and then press Enter Sphere correctionInput list Switching the Input ModeHdmi 1/2, Component and Computer buttons Resize Mode Press Resize on the remote control or on the projectorOperating with the Remote Control Adjusting the ImageSelecting the Picture Mode Press image adjustment buttonsSwitching the Iris Setting Auto Sync Auto Sync AdjustmentSwitching the Eco+Quiet Mode Hiding the Menu Temporarily Menu HideMenu Items Picture menuRGB 3D Menu Using the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press MenuTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press Enter Selecting the Picture Mode Picture Adjustment Picture MenuMenu operation n Adjusting the Image  Switching the Iris SettingUsing the Advanced Eco+Quiet Adjusting the Colors Adjust the curve to adjust the image brightnessCustom Gamma PickerS. color adjustment screen Adjusting the Bright Boost Selecting the Film ModeSetting Detail Enhancement Resetting All Adjustment ItemsComputer Image Adjustment SIG-ADJ Menu Setting the ResolutionSignal Type Setting Setting the Video SetupAdjusting the Dynamic Range Signal InfoAdjusting the Projected Image SCR-ADJ Menu Setting the Resize Mode2Adjusting the Image Position TriggerAdjusting the Projected Image SCR-ADJ Menu Continue Adjusting the OverscanSetting On-screen Display Black MaskSee page 22 for details of Projection PRJ Mode Selecting the Menu Screen PositionReversing/Inverting Projected Images Selecting the On-screen Display LanguageSetting the Power Save Mode Economy Mode Setting No Operation Off ModeEconomy Mode Setting One Touch Play Setting the One-Touch Playback Function One Touch PlaySetting the System Standby Function System Standby Setting the Input Terminal Names Input NameAdjusting the Projector Function PRJ-ADJ Menu  Setting the Demo Mode Fan Mode Setting Turning LED OffReturning to the Default Settings  Lamp Timer LifeSetting Up the Projector Network Environment Network Menu Setting a PasswordSelect Password, then press Q On the projector, pressDhcp Client Setting TCP/IP SettingReturning to Default Settings Network Enter IP Address using P, R, Q and O, then press EnterConfirming the Projector Information You can confirm the following itemsPrecautions on installing the IR emitter Precautions on using the 3D GlassesEnjoying 3D Image Viewing Precautions on viewing 3D images As you get more comfortable viewing 3D imagesEpilepsy Supplied Accessories for the 3D Glasses Part NamesBefore Using the 3D Glasses Replacing the Button Cell BatteryRemove the button cell battery Close the battery coverAttaching the Nose Pad Using the 3D GlassesAttaching the 3D Glasses Band Connecting the IR Emitter to the Projector Install the IR emitter unit to the standPosition the IR emitter To 3D Synchro terminal IR emitter cableWhen 3D Auto Change is set to No When 3D Auto Change is set to YesViewing 3D Images Turn on the 3D Glasses and place them over your eyesPress 3D Menu Press P/R to select 3D Press O/Q to select On or Off3D Depth Adjust 3D Auto Change3D Format Viewing Time InfoSetting the 3D Format Menu 3D Glasses lenses Specifications 3D Glasses S 0 8 B Manufacture number ColorDimensions Effective DistanceMaintenance Cleaning the projectorCleaning the lens or lens cover Cleaning the exhaust and intake ventsAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Lamp unitResetting the Lamp Timer Compatibility Chart ComputerDTV Troubleshooting 23-27Problem Check 68-70 For Sharp Assistance Specifications HdmiDimensions Index