Sharp XV-Z30000 appendix Press 3D Menu, Press P/R to select 3D Press O/Q to select On or Off

Receiving a 3D Image Signal That Cannot Be Detected Automatically

1 Press 3D MENU.

• The 3D MENU screen is displayed.

2 Press P/R to select “3D”.

3Press O/Q to select “On” or “Off”.

•To view in 3D mode: Select “On”, and then go to step 4.

•Refer to “Setting the 3D Format Menu” on page 71 for supported 3D signals and formats.

•If you select “Off”, the video source will be

displayed with no conversion.

4 Press P/R to select “3D Format”, and then press ENTER.

5 Press P/R to select a supported format from the list, and then press ENTER.

Auto

Side By Side

Top And Bottom

• If you select the same system as that of the input signal, 3D images are displayed.

6 Turn on the 3D Glasses and place them over your eyes.

• Press the power button for at least 2 seconds.

• The LED light blinks 3 times.

7 You can now view 3D images.

Ending 3D Image Viewing

1 Press 3D ON/OFF during the 3D mode.

2 Take off the 3D Glasses and turn off the power.

•Press the power button for at least 2 seconds.

• The LED light lights for 2 seconds.

Note

•If the input signal switches to 2D, 2D images are displayed automatically.

•3D mode is canceled automatically in the following cases:

-When the signal is no longer received

-When the signal type changes

-When input selection is changed

-When the power is turned off

Features Useful

69