Sharp XV-Z30000 Adjusting the Projector Function PRJ-ADJ Menu, Turning LED Off, Memory Menu

Menu operation n Page 42

Adjusting the Projector Function (“PRJ-ADJ” Menu) (Continued)

5 Turning LED Off

LEDs (indicators) on the projector can be turned off when they are disturbing the projection.

Selectable	Description
items
On	LEDs are turned on.
Off	LEDs are turned off while the projector
	is in operation. (LEDs turn on while
	the projector is in the Standby mode,
	warming up or indicating problems.)

Note

•When Auto Power Off function is set to “Off”, “LED” is set to “On” automatically. Be sure to set Auto Power Off function to “On” to use LED Off function. (See page 54.)

Setting the Demo Mode

Set the Demo Mode to “On” or “Off”.

Selectable	Description
items
On	This enables Demo Mode.
Off	This disables Demo Mode.

Fan Mode Setting

This function changes the fan rotation speed.

Selectable	Description
items
Normal	Suitable for normal environments.
High	Select this when using the projector at
	altitudes of approximately 4,900 feet
	(1,500 meters) or more.

•When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

8 Memory Menu

You can store the settings of the projector's lens shift (ZOOM, FOCUS) and others (such as INPUT, PICTURE MODE, RESIZE, PRJ Mode, V-Image Shift, KEYSTONE and Anamorphic), or activate the stored settings.

The Memory Menu screen can also be displayed by pressing MEMORY on the remote control.

a Load Memory

To activate the desired settings, select the item where the settings are stored.

Note

•Pressing any button while the projector is in the process of activating the “Load Memory” function will display messages:

–“STOP”: stops the activation of the “Load Memory” function.

–“CONTINUE”: allows the projector to the already set position.

–“Return to the initial position.”: let the projector go back to the initial position.

•The confi rmation screen of “Load Memory” will also be displayed by pressing MEMORY 1/2 on the remote control. Press MEMORY 1/2 again to perform the “Load Memory” function.

•The memory has a margin of error of approximately ±2%. Use the remote control to make fi ne adjustments.

a Save Memory

Select an item where you want to store the setting.

Note

•When you select an item where some setting has been stored, the stored setting will be overwritten and erased.

a Memory Name

Select the item name you want to change. Use O/Q to choose the characters to change, and P/R to select the characters to enter.

56