Sharp XV-Z30000 Adjusting the Projected Image SCR-ADJ Menu, Setting the Resize Mode, Trigger

Adjusting the Projected Image (“SCR-ADJ” Menu)

Pict.	SIG	SCR-ADJ		PRJ	Net.
Resize			Normal
V-Image Shift		0
Trigger			Off
Anamorphic			Off
Overscan		0	On
Black Mask
CBNR			Off
OSD Display			On
OSD Brightness			Standard
Background			Logo
Menu Position			Upper Left
PRJ Mode			Front
Language			English
SEL./ADJ.				ENTER
RETURN				END

1 Setting the Resize Mode

Note

•For details of the Resize mode, see page 36.

•You can also press RESIZE on the remote control to set the resize mode. (See page 36.)

2Adjusting the Image Position

You can move the projected image vertically.

? button	_ button
Downward	Upward

? button _ button

Note

•The adjustable range of the image shift may vary depending on:

-the Resize mode

-the Picture mode

-the input signal resolution

-the input 3D signal type

Menu operation n Page 42

3Trigger

This function allows you to set whether to output a control signal (12V DC) that is output from the trigger terminal to a trigger- supported screen or anamorphic lens.

Selectable	Description
items
Screen	A control signal (12V) is output to a
	trigger-supported screen while linked
	with the power of the main unit. The
	screen extends and retracts automati-
	cally when the power of the projector is
	turned on and off.
Anamorphic	A control signal (12V) is output when
	the Anamorphic function is set to
	"2.35:1" or "16:9".
Off	The Trigger function is not activated. (A
	control signal (12V) is not output.)

4Anamorphic

This function adjusts the vertical and horizontal directions of the image when projected using an anamorphic lens.

Selectable	Description
items
2.35:1	Stretches a 2.35:1 image in the vertical
	direction of the panel resolution.
16:9	Select this when viewing images other
	than 2.35:1 while using an anamorphic
	lens.This compresses a 16:9 image
	in the horizontal direction while leav-
	ing the height of the panel resolution
	unchanged.
Off	The input image is projected as is.
	(Black bands are displayed on the top,
	bottom, left and right.)

Note

•RESIZE does not function when “Anamorphic” is set to “2.35:1” or “16:9”.

Features Useful

51