KEY OPERATOR PROGRAMS
To change an account number
1.Press the “CHANGE” key.
2.Enter the account number to be changed using the
3.Enter a new account number.
4.Press the “ENTER” key.
●If a number that is already registered is entered, the message “THIS NUMBER IS ALREADY USED.” will appear. Press the “OK” key and enter another number.
5.To change other account numbers, repeat steps 2 to 4. Press the “OK” key twice to exit the program.
To print all registered account numbers
1.Press the “PRINT” key.
●The copier will start printing. To stop printing after starting, press the “CANCEL” key.
2.Press the “OK” key to exit the program.
Price/Copy Setting
This program is used to set the price per copy. Four price per copy values can be set (#1, #2, #3, and #4). As copies are made, the cumulative cost of the copies is kept in memory.
When the “PRICE/COPY SETTING” key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS |
|
PRICE/COPY SETTING | OK |
INPUT NEW UNIT PRICE AND PRESS [ENTER].
USE INTERRUPT KEY FOR DECIMAL POINT.
PRICE CODE | PRESENT PRICE | NEW PRICE | |
# 1 | 80 |
| |
# 2 | 60 |
| |
# | 3 | 180 |
|
# | 4 | 90 |
|
ENTER
1/2
1.Enter the new price for price code #1 by using the
●Use the INTERRUPT key for decimal points.
●If the “ENTER” key is pressed without entering a value, the price per copy will not be changed.
14