Sharp AR-C160 manual Initial Color Balance Setting, Size Setting for Extra

KEY OPERATOR PROGRAMS

Initial Color Balance Setting

Color balance settings that have been adjusted using the special function of “Color Balance” explained on page 3-22 of the Operation Manual can be called up and set as initial color balance settings* by storing them ahead of time in a job program (page 2-18 of the Operation Manual). Use this feature when you want to repeatedly use settings for a favorite color or for correction when a change occurs in the color balance.

*Preset values displayed when you select the special function of “Color Balance”. The factory default settings are the “0” position for all eight levels of each color.

When the “INITIAL COLOR BALANCE SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
INITIAL COLOR BALANCE SETTING		OK
PRESS PROGRAM NUMBER IN WHICH COLOR BALANCE
PROGRAM IS REGISTERED.
1	2	3
4	5	6
7	8	9

RETURN TO THE FACTORY DEFAULT

SETTING.

1.Press the job program number key in which the color balance settings have been stored.

●If a job program number key is pressed that does not have color balance settings, a warning message will appear.

●To return color balance settings that have been stored as initial settings to the factory default settings (the “0” position for all eight levels of each color), press the “RETURN TO THE FACTORY DEFAULT SETTINGS” key.

2.Press the “OK” key.

●The color balance settings stored in the job program number key that was pressed are set as the initial settings.

Size Setting for [EXTRA]

This program allows the paper size to be set for each paper tray. The setting through this program will only be effective when the paper size indicator of the paper tray is set to [EXTRA].

When the “SIZE SETTING FOR [EXTRA]” key is pressed, the following display will appear.

22