Sharp AR-C160 manual Press the Custom Settings key, Enter 0 five times using the 10-key pad

Page 4

KEY OPERATOR CODE NUMBER

A key operator code number must be registered before a key operator program can be used. The key operator must remember this number. Only this registered number will allow access to the key operator programs.

CUSTOM SETTINGS

CUSTOM

SETTINGS

1	Registering the key operator code number
4	1 Press the CUSTOM SETTINGS key.

7

AUDIT

Press the “KEY OPERATOR PROGRAMS” key on the EXIT 2 touch panel.

●The following display will appear.

DISPLAY	KEY OPERATOR
CONTRAST	PROGRAMS

AUTO	AUTO	1	11	100%
		8/2
EXPOSURE	PAPER SELECT			COPY RATIO

S

4 5 6

CLEAR

ALL

KEY OPERATOR PROGRAMS			EXIT
ENTER KEY OPERATOR CODE.
KEY OPERATOR CODE

	- - - - -

7	8	9		Enter 0 five times using the 10-key pad.
AUDIT		PROGRAM	C	3 ● As each 0 is entered, the dashes in the display will change to
	0	P	C
	0	P	CLEAR	asterisks.

KEY OPERATOR PROGRAMS

EXIT

COPIER

	TOTAL COUNT	PROGRAM LIST
	TOTAL COUNT	PRINTOUT
		PRINTOUT
	KEY OPERATOR PROGRAMS
	COPIER MODE	OK
	OTHER FUNCTION	TIMER SETTINGS
	SETTINGS	TIMER SETTINGS
	SETTINGS
	ENABLE/DISABLE	ACCOUNT CONTROL
	SETTINGS	ACCOUNT CONTROL
	SETTINGS

4

5

Press the “COPIER” key on the touch panel.

Press the “OTHER FUNCTION SETTINGS” key.

AUTO COLOR CALIBRATION

2

Image 4

Contents AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key padKEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Enter the key operator code number Using the key operator programsPress the Copier key or the Printer key on Touch panel Press the key of the desired program on the touch panel Select the desired category on the touch panelFollow instructions for the program Account Control Auditing ModePress the OK key to exit the program Press the key to advance through the accounts Number of Copies per AccountPress the upper OK key to exit the program Billing by Account Resetting Account To reset all accountsTo reset a single account Press the key of an account to be resetAccount Number Control To register accountsTo delete accounts Press the Enter keyPrice/Copy Setting To change an account numberTo print all registered account numbers Press the Print keySimilarly enter the prices for price codes #2 to #4 To set a limit Account Limit SettingTo set a limit for all accoounts Account Number Security Other Function Settings Exposure AdjustmentToner Save Mode B/W Adjust the exposure using the and keysAdd or Change Extra Preset Ratios Setting a Maximum Number of CopiesInput the number using the 10-key pad Use the and keys to set the desired copy ratioErase Width Adjustment Initial Margin Shift SettingAdjust the value for each side using the and keys Initial Status Setting To establish new initial settingsTo return to the factory default settings Press the Return to the Factory Default SETTINGS. keyInitial Color Balance Setting Size Setting for ExtraRequire Key Operator Code Select a paper size for Extra settingSelect a paper tray on the touch panel Stream Feeding Mode Override Sorter Bin Capacity LimitTimer Settings Sleep Mode SettingAuto Clear Setting Enter the time interval using Keys Press the OK keyMessage Time Setting Preheat Mode SettingSet the time using the and keys Press the OK key ENABLE/DISABLE Settings Disabling of Beep When Keys TouchedDisabling of Auto Tray Switching Disabling of Auto Paper SelectionDisabling of Bypass-Tray in Duplex Copy Disabling Deletion of Job ProgramsDisabling of Document Feeder Disabling of Duplex CopyingDisabling of PC/Modem Access Disabling of Covers ModeDisabling of Stapler Disabling of Sleep Mode Disabling of Pre-scan in B/W CopyOther Programs Total CountProgram List Printout Press the Copier keyAuto Color Calibration Press the Execute keyEnable Bypass-Tray Type Detection Enable Bypass-Tray Size DetectionPrinter KEY Operator Programs Prohibit Auto Tray Switching Prohibit Bypass-Tray SelectionKEY Operator Assistance Call Sharp Corporation

Related manuals

Manual 148 pages 6.18 Kb