Sharp AR-C160 Initial Status Setting, To establish new initial settings, Transfer Belt Position

Page 23

KEY OPERATOR PROGRAMS

Initial Status Setting

The copier will assume the initial settings when it is turned on, when the CLEAR ALL key is pressed, or when the auto clear interval has elapsed after a copy run. Use this program to establish the initial settings.

When the “INITIAL STATUS SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

INITIAL STATUS SETTING

OK

SET THE INITIAL STATUS.

ESTABLISH NEW INITIAL

SETTINGS.

1/4 1/4

RETURN TO THE FACTORY DEFAULT

SETTINGS.

To establish new initial settings

1.Press the “ESTABLISH NEW INITIAL SETTINGS.” key.

2.Select all initial settings on the operation panel.

●The following functions cannot be set:

Number of copies, XY zoom, automatic copy ratio selection, interrupt, special functions, information, and LCD contrast.

3.Press the “OK” key.

To return to the factory default settings

Press the “RETURN TO THE FACTORY DEFAULT SETTINGS.” key.

Transfer Belt Position

This program is used to select the home position of the transfer belt either to the B/W side or the COLOR side. The default setting is the COLOR side.

KEY OPERATOR PROGRAMS
TRANSFER BELT POSITION		OK
	COLOR
1/4	B/W	1/4

1.Press the key of the desired home position, “COLOR” or “B/W”.

2.Press the “OK” key.

21

Image 23

Contents AR-C160 Page Contents Enter 0 five times using the 10-key pad Press the Custom Settings keyKEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Press the Copier key or the Printer key on Touch panel Using the key operator programsEnter the key operator code number Follow instructions for the program Select the desired category on the touch panelPress the key of the desired program on the touch panel Press the OK key to exit the program Auditing ModeAccount Control Press the upper OK key to exit the program Number of Copies per AccountPress the key to advance through the accounts Billing by Account Press the key of an account to be reset Resetting AccountTo reset all accounts To reset a single accountPress the Enter key Account Number ControlTo register accounts To delete accountsPress the Print key Price/Copy SettingTo change an account number To print all registered account numbersSimilarly enter the prices for price codes #2 to #4 To set a limit for all accoounts Account Limit SettingTo set a limit Account Number Security Adjust the exposure using the and keys Other Function SettingsExposure Adjustment Toner Save Mode B/WUse the and keys to set the desired copy ratio Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Input the number using the 10-key padAdjust the value for each side using the and keys Initial Margin Shift SettingErase Width Adjustment Press the Return to the Factory Default SETTINGS. key Initial Status SettingTo establish new initial settings To return to the factory default settingsSize Setting for Extra Initial Color Balance SettingSelect a paper tray on the touch panel Select a paper size for Extra settingRequire Key Operator Code Override Sorter Bin Capacity Limit Stream Feeding ModeEnter the time interval using Keys Press the OK key Timer SettingsSleep Mode Setting Auto Clear SettingSet the time using the and keys Press the OK key Preheat Mode SettingMessage Time Setting Disabling of Auto Paper Selection ENABLE/DISABLE SettingsDisabling of Beep When Keys Touched Disabling of Auto Tray SwitchingDisabling of Duplex Copying Disabling of Bypass-Tray in Duplex CopyDisabling Deletion of Job Programs Disabling of Document FeederDisabling of Stapler Disabling of Covers ModeDisabling of PC/Modem Access Disabling of Pre-scan in B/W Copy Disabling of Sleep ModePress the Copier key Other ProgramsTotal Count Program List PrintoutPress the Execute key Auto Color CalibrationPrinter KEY Operator Programs Enable Bypass-Tray Size DetectionEnable Bypass-Tray Type Detection Prohibit Bypass-Tray Selection Prohibit Auto Tray SwitchingKEY Operator Assistance Call Sharp Corporation

Related manuals

Manual 148 pages 6.18 Kb