Sharp AR-C160 manual Timer Settings, Sleep Mode Setting, Auto Clear Setting

Page 27

KEY OPERATOR PROGRAMS

TIMER SETTINGS

The programs of this category are used to set the timers for some functions. These programs can be selected by pressing the “TIMER SETTINGS” key and then selecting the desired program key.

Sleep Mode Setting

The sleep mode is a function to turn off the power to the fusing unit automatically once a programmed length of time has elapsed without any copier operation after the last copy of a run is made or power is turned on.

This function lowers the user’s electricity bill, reduces waste of natural resources, and cuts down on environmental pollution.

The programmed time is set to 60 minutes for this function on completion of shipment from the factory. The default time can be changed optionally within the prescribed range of time. We suggest you set the most appropriate time according to your usage pattern.

Use this program to set the time interval. The interval can be set in 1 minute increments between 10 and 240 minutes.

When the “SLEEP MODE SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

SLEEP MODE SETTING

OK

SET THE TIME INTERVAL FROM LAST COPY

UNTIL SLEEP IN 1 MIN. INCREMENTS.

(10~240)

TIME: 60 min.

1.	Enter the time interval using the	and	keys.
2.	Press the “OK” key.

Auto Clear Setting

Use this program to set the time interval to return the copier to the initial settings after the last copy of a run has been completed. The time can be set from 10 to 240 seconds in 10 second increments.

When the “AUTO CLEAR SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
AUTO CLEAR SETTING		OK
SET THE TIME FOR AUTO CLEAR.
TIME:	60 (10~240)sec.

CANCEL TIMER

1.Set the desired time interval using the and keys.

●To disable the auto clear, press the check box of “CANCEL TIMER” to display a check mark in the check box.

2.Press the “OK” key.

25

Image 27

Contents AR-C160 Page Contents Enter 0 five times using the 10-key pad Press the Custom Settings keyKEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Using the key operator programs Enter the key operator code numberPress the Copier key or the Printer key on Touch panel Select the desired category on the touch panel Press the key of the desired program on the touch panelFollow instructions for the program Auditing Mode Account ControlPress the OK key to exit the program Number of Copies per Account Press the key to advance through the accountsPress the upper OK key to exit the program Billing by Account Press the key of an account to be reset Resetting AccountTo reset all accounts To reset a single accountPress the Enter key Account Number ControlTo register accounts To delete accountsPress the Print key Price/Copy SettingTo change an account number To print all registered account numbersSimilarly enter the prices for price codes #2 to #4 Account Limit Setting To set a limitTo set a limit for all accoounts Account Number Security Adjust the exposure using the and keys Other Function SettingsExposure Adjustment Toner Save Mode B/WUse the and keys to set the desired copy ratio Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Input the number using the 10-key padInitial Margin Shift Setting Erase Width AdjustmentAdjust the value for each side using the and keys Press the Return to the Factory Default SETTINGS. key Initial Status SettingTo establish new initial settings To return to the factory default settingsSize Setting for Extra Initial Color Balance SettingSelect a paper size for Extra setting Require Key Operator CodeSelect a paper tray on the touch panel Override Sorter Bin Capacity Limit Stream Feeding ModeEnter the time interval using Keys Press the OK key Timer SettingsSleep Mode Setting Auto Clear SettingPreheat Mode Setting Message Time SettingSet the time using the and keys Press the OK key Disabling of Auto Paper Selection ENABLE/DISABLE SettingsDisabling of Beep When Keys Touched Disabling of Auto Tray SwitchingDisabling of Duplex Copying Disabling of Bypass-Tray in Duplex CopyDisabling Deletion of Job Programs Disabling of Document FeederDisabling of Covers Mode Disabling of PC/Modem AccessDisabling of Stapler Disabling of Pre-scan in B/W Copy Disabling of Sleep ModePress the Copier key Other ProgramsTotal Count Program List PrintoutPress the Execute key Auto Color CalibrationEnable Bypass-Tray Size Detection Enable Bypass-Tray Type DetectionPrinter KEY Operator Programs Prohibit Bypass-Tray Selection Prohibit Auto Tray SwitchingKEY Operator Assistance Call Sharp Corporation

Related manuals

Manual 148 pages 6.18 Kb