Sharp AR-C160 manual Account Limit Setting, To set a limit for all accoounts

Page 18

KEY OPERATOR PROGRAMS

Account Limit Setting

This program is used to set the maximum number of copies which can be made against a registered account number.

When the “ACCOUNT LIMIT SETTING” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
ACCOUNT LIMIT SETTING			OK
INPUT ACCOUNT NUMBER TO BE LIMITED.
ACCOUNT	COPY	NUMBER OF	MAXIMUM
NUMBER	MODE	COPIES MADE	MAXIMUM
-----	COLOR
	B/W
ALL ACCOUNTS			ENTER

To set a limit

1.Enter the account number to be limited.

2.Enter the upper limit (max. 999,999) for the account.

●The limit can be set for color copying and black/white copying respectively.

●If a limit for the account has been already set, the limit will be displayed. Press the CLEAR ( C ) key before entering a new upper limit.

●0 can be set as the upper limit. If 0 is set, copying in the specified mode (color or black/white) will be disabled against the account.

●To cancel a limit, press the CLEAR ( C ) key and proceed to step 3 without entering a limit.

3.Press the “ENTER” key.

4.To limit other accounts, repeat steps 1 to 3. Press the “OK” key to exit the program.

To set a limit for all accoounts

1.Press the “ALL ACCOUNTS” key on the touch panel.

●“ALL” will appear under “ACCOUNT NUMBER”.

2.Enter the upper limit (max. 999,999) for all accounts.

●To cancel the limit for all accounts, press the CLEAR ( C ) key and proceed to step 3 without entering a limit.

3.Press the “ENTER” key.

4.Press the “OK” key to exit the program.

16

Image 18

Contents AR-C160 Page Contents Press the Custom Settings key Enter 0 five times using the 10-key padKEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Using the key operator programs Enter the key operator code numberPress the Copier key or the Printer key on Touch panel Select the desired category on the touch panel Press the key of the desired program on the touch panelFollow instructions for the program Auditing Mode Account ControlPress the OK key to exit the program Number of Copies per Account Press the key to advance through the accountsPress the upper OK key to exit the program Billing by Account To reset a single account Resetting AccountTo reset all accounts Press the key of an account to be resetTo delete accounts Account Number ControlTo register accounts Press the Enter keyTo print all registered account numbers Price/Copy SettingTo change an account number Press the Print keySimilarly enter the prices for price codes #2 to #4 Account Limit Setting To set a limitTo set a limit for all accoounts Account Number Security Toner Save Mode B/W Other Function SettingsExposure Adjustment Adjust the exposure using the and keysInput the number using the 10-key pad Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Use the and keys to set the desired copy ratioInitial Margin Shift Setting Erase Width AdjustmentAdjust the value for each side using the and keys To return to the factory default settings Initial Status SettingTo establish new initial settings Press the Return to the Factory Default SETTINGS. keyInitial Color Balance Setting Size Setting for ExtraSelect a paper size for Extra setting Require Key Operator CodeSelect a paper tray on the touch panel Stream Feeding Mode Override Sorter Bin Capacity LimitAuto Clear Setting Timer SettingsSleep Mode Setting Enter the time interval using Keys Press the OK keyPreheat Mode Setting Message Time SettingSet the time using the and keys Press the OK key Disabling of Auto Tray Switching ENABLE/DISABLE SettingsDisabling of Beep When Keys Touched Disabling of Auto Paper SelectionDisabling of Document Feeder Disabling of Bypass-Tray in Duplex CopyDisabling Deletion of Job Programs Disabling of Duplex CopyingDisabling of Covers Mode Disabling of PC/Modem AccessDisabling of Stapler Disabling of Sleep Mode Disabling of Pre-scan in B/W CopyProgram List Printout Other ProgramsTotal Count Press the Copier keyAuto Color Calibration Press the Execute keyEnable Bypass-Tray Size Detection Enable Bypass-Tray Type DetectionPrinter KEY Operator Programs Prohibit Auto Tray Switching Prohibit Bypass-Tray SelectionKEY Operator Assistance Call Sharp Corporation

Related manuals

Manual 148 pages 6.18 Kb