KEY OPERATOR PROGRAMS
OTHER FUNCTION SETTINGS
The programs of this category are used to adjust various settings of copier functions. These programs can be selected by pressing the “OTHER FUNCTION SETTINGS” key and then selecting the desired program key.
Key Operator Code Number Change
See page 2, KEY OPERATOR CODE NUMBER.
Exposure Adjustment
Use this program to lighten or darken copies in the automatic exposure mode. The factory setting is level 3 for both color copying and black/ white copying.
When the “EXPOSURE ADJUSTMENT” key is pressed, the following display will appear.
KEY OPERATOR PROGRAMS |
|
EXPOSURE ADJUSTMENT | OK |
AUTO EXPOSURE CAN BE ADJUSTED. |
|
COLOR |
|
B/W |
|
1.Adjust the exposure using the 
and 
keys.
●The exposure level can be adjusted for color copying and black/ white copying respectively.
2.Press the “OK” key.
Toner Save Mode (B/W)
The toner save mode will reduce toner consumption by approxi- mately 10% in black/white copying regardless of exposure mode and original image type. Copies will be lighter but still adequate for general use. Selection of this mode does not affect color copying.
To turn on the toner save mode, press the check box of “TONER SAVE MODE (B/W)” to display a check mark in the check box.
To turn off the toner save mode, press the check box of this program again to clear the check mark in the check box.
18