Sharp AR-C160 manual Add or Change Extra Preset Ratios, Setting a Maximum Number of Copies

Page 21

KEY OPERATOR PROGRAMS

Add or Change Extra Preset Ratios

Two extra preset copy ratios can be added within both the reduction range (25% to 99%) and the enlargement range (101% to 400%). Only added preset copy ratios can be changed. The standard preset copy ratios are fixed in memory and cannot be changed.

When the “ADD OR CHANGE EXTRA PRESET RATIOS” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

ADD OR	CHANGE	EXTRA
PRESET	RATIOS	OK

SELECT THE RATIO TO BE ADDED OR CHANGED AND

SET NEW PRESET RATIO.

REDUCTION ENLARGEMENT

60

(25~99)(101~400)

1.Press a key under “REDUCTION” or “ENLARGEMENT” on the touch panel.

●The selected key will be highlighted.

2.Use the and keys to set the desired copy ratio.

●To decrease or increase the copy ratio rapidly, press and hold

the or key.

●To add or change other extra preset copy ratios, repeat steps 1 and 2.

●To cancel an extra preset ratio, select the copy ratio and press the CLEAR ( C ) key.

3.Press the “OK” key.

Setting a Maximum Number of Copies

Use this program to limit the maximum number of copies per copy run which can be input in the copy quantity display.

When the “SETTING A MAXIMUM NUMBER OF COPIES” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
SETTING A MAXIMUM	OK
NUMBER OF COPIES
INPUT THE NUMBER AND PRESS [OK].
MAXIMUM NUMBER OF COPIES
165	(1~999)

1.Input the number using the 10-key pad.

● A number from 1 to 999 can be set.

2.Press the “OK” key.

19

Image 21

Contents AR-C160 Page Contents Enter 0 five times using the 10-key pad Press the Custom Settings keyKEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Using the key operator programs Enter the key operator code numberPress the Copier key or the Printer key on Touch panel Select the desired category on the touch panel Press the key of the desired program on the touch panelFollow instructions for the program Auditing Mode Account ControlPress the OK key to exit the program Number of Copies per Account Press the key to advance through the accountsPress the upper OK key to exit the program Billing by Account To reset all accounts Resetting AccountTo reset a single account Press the key of an account to be resetTo register accounts Account Number ControlTo delete accounts Press the Enter keyTo change an account number Price/Copy SettingTo print all registered account numbers Press the Print keySimilarly enter the prices for price codes #2 to #4 Account Limit Setting To set a limitTo set a limit for all accoounts Account Number Security Exposure Adjustment Other Function SettingsToner Save Mode B/W Adjust the exposure using the and keysSetting a Maximum Number of Copies Add or Change Extra Preset RatiosInput the number using the 10-key pad Use the and keys to set the desired copy ratioInitial Margin Shift Setting Erase Width AdjustmentAdjust the value for each side using the and keys To establish new initial settings Initial Status SettingTo return to the factory default settings Press the Return to the Factory Default SETTINGS. keySize Setting for Extra Initial Color Balance SettingSelect a paper size for Extra setting Require Key Operator CodeSelect a paper tray on the touch panel Override Sorter Bin Capacity Limit Stream Feeding ModeSleep Mode Setting Timer SettingsAuto Clear Setting Enter the time interval using Keys Press the OK keyPreheat Mode Setting Message Time SettingSet the time using the and keys Press the OK key Disabling of Beep When Keys Touched ENABLE/DISABLE SettingsDisabling of Auto Tray Switching Disabling of Auto Paper SelectionDisabling Deletion of Job Programs Disabling of Bypass-Tray in Duplex CopyDisabling of Document Feeder Disabling of Duplex CopyingDisabling of Covers Mode Disabling of PC/Modem AccessDisabling of Stapler Disabling of Pre-scan in B/W Copy Disabling of Sleep ModeTotal Count Other ProgramsProgram List Printout Press the Copier keyPress the Execute key Auto Color CalibrationEnable Bypass-Tray Size Detection Enable Bypass-Tray Type DetectionPrinter KEY Operator Programs Prohibit Bypass-Tray Selection Prohibit Auto Tray SwitchingKEY Operator Assistance Call Sharp Corporation

Related manuals

Manual 148 pages 6.18 Kb