Sharp AR-C160 manual Similarly enter the prices for price codes #2 to #4

Page 17

KEY OPERATOR PROGRAMS

2.Similarly enter the prices for price codes #2 to #4.

● The following display will appear.

KEY OPERATOR PROGRAMS

PRICE/COPY SETTING		OK
PRICE CODE	PRESENT PRICE
# 1	100.000
# 2	10
# 3	180
# 4	90

ACCOUNT NUMBER	MODE	PRICE CODE
	COLOR	#
	B/W	#
ALL ACCOUNTS		ENTER
		2/2

3.Enter the account number for which the price code is set, and then press the “ENTER” key.

●To set a single price code for all accounts, press the “ALL ACCOUNTS” key and then press the “ENTER” key.

4.Enter the price code (#1 - #4) for color copying and then press the “ENTER” key.

●Enter the number using “1” through “4” keys of the 10-key pad.

●If only the “ENTER” key is pressed without entering any price code or “0” is pressed, no price per copy will be set, or previous setting will remain valid.

5.Enter the price code (#1 - #4) for black/white copying and then press the “ENTER” key.

●Enter the number using “1” through “4” keys of the 10-key pad.

●If only the “ENTER” key is pressed without entering any price code or “0” is pressed, no price per copy will be set, or previous setting will remain valid.

6.Continue with steps 3 to 5 for other individual accounts.

Press the “OK” key to exit the program.

15

Image 17

Contents AR-C160 Page Contents Enter 0 five times using the 10-key pad Press the Custom Settings keyKEY Operator Code Number KEY Operator Programs KEY Operator Programs Printer KEY Operator Programs optional Press the Copier key or the Printer key on Touch panel Using the key operator programsEnter the key operator code number Follow instructions for the program Select the desired category on the touch panelPress the key of the desired program on the touch panel Press the OK key to exit the program Auditing ModeAccount Control Press the upper OK key to exit the program Number of Copies per AccountPress the key to advance through the accounts Billing by Account To reset all accounts Resetting AccountTo reset a single account Press the key of an account to be resetTo register accounts Account Number ControlTo delete accounts Press the Enter keyTo change an account number Price/Copy SettingTo print all registered account numbers Press the Print keySimilarly enter the prices for price codes #2 to #4 To set a limit for all accoounts Account Limit SettingTo set a limit Account Number Security Exposure Adjustment Other Function SettingsToner Save Mode B/W Adjust the exposure using the and keysSetting a Maximum Number of Copies Add or Change Extra Preset RatiosInput the number using the 10-key pad Use the and keys to set the desired copy ratioAdjust the value for each side using the and keys Initial Margin Shift SettingErase Width Adjustment To establish new initial settings Initial Status SettingTo return to the factory default settings Press the Return to the Factory Default SETTINGS. keySize Setting for Extra Initial Color Balance SettingSelect a paper tray on the touch panel Select a paper size for Extra settingRequire Key Operator Code Override Sorter Bin Capacity Limit Stream Feeding ModeSleep Mode Setting Timer SettingsAuto Clear Setting Enter the time interval using Keys Press the OK keySet the time using the and keys Press the OK key Preheat Mode SettingMessage Time Setting Disabling of Beep When Keys Touched ENABLE/DISABLE SettingsDisabling of Auto Tray Switching Disabling of Auto Paper SelectionDisabling Deletion of Job Programs Disabling of Bypass-Tray in Duplex CopyDisabling of Document Feeder Disabling of Duplex CopyingDisabling of Stapler Disabling of Covers ModeDisabling of PC/Modem Access Disabling of Pre-scan in B/W Copy Disabling of Sleep ModeTotal Count Other ProgramsProgram List Printout Press the Copier keyPress the Execute key Auto Color CalibrationPrinter KEY Operator Programs Enable Bypass-Tray Size DetectionEnable Bypass-Tray Type Detection Prohibit Bypass-Tray Selection Prohibit Auto Tray SwitchingKEY Operator Assistance Call Sharp Corporation

Related manuals

Manual 148 pages 6.18 Kb